MAINTENANCE PLANNING OF THE SEWING NEEDLES OF SIMPLE SEWING MACHINES

• Main Authors: ŞUTEU Marius Darius, BABAN Calin Florin, BABAN Marius, TOTH (Kiss) Edit, PANCU Rareș Mihai
• Format: Article
• Language: English
• Published: Editura Universităţii din Oradea 2017-05-01
• Series: Annals of the University of Oradea: Fascicle of Textiles, Leatherwork
• Subjects: Maintenance; fuzzy; wear; Matlab; sewing machines
• Online Access: http://textile.webhost.uoradea.ro/Annals/Vol%20XVIII-No%202-2017/Textile/Art.nr.%20263-pag.%2099-102.pdf

The effectiveness of simple sewing machines can be increased through the planning of predictive maintenance activities. The monitoring of the technical condition of the sewing needles of simple sewing machines was based on the measurement of their noise level. For this purpose a Center 322 sonometer was used, while the data obtained during the monitoring process was analyzed through the E322 software. The working speed of the simple sewing machine that was used for obtaining the experimental results varied from 200 stitches/minute to 4000 stitches/minute. The noise levels of a new needle at the working speed of 200 stitches/minute and 4000 stitches/minute were measured. The noise levels for a fault needle at the same working speed of 200 stitches/minute, respectively 4000 stitches/minute were also measured. Using Fuzzy Logic Toolbox ™ module of Matlab®, a decision-making system for determining when replacement of the sewing needles of simple sewing machines should be performed was developed. A case study illustrates the employment of the decision-making system based on fuzzy logic for a simple sewing machine. By replacing the sewing needles of simple sewing machines at the time specified through the decision-making system based on fuzzy logic, the occurrence of the failure can be prevented and the quality of textile products can be improved.