The experience of modernization of mills of wet wire drawing for the metal wire cord
There is a tendency in recent years to use by the world’s leading manufacturers of tires metal wires of small diameter (0,175– 0,20 mm) with higher strength, which requires the use of increased total number of extracts on wet drawing. The possibility of increasing the compression can be limited not...
Main Authors: | , |
---|---|
Format: | Article |
Language: | English |
Published: |
Belarusian National Technical University
2019-01-01
|
Series: | Litʹë i Metallurgiâ |
Subjects: | |
Online Access: | https://lim.bntu.by/jour/article/view/2444 |