The Effect of Multi-Extrusion Process of Polylactic Acid on Tensile Strength and Fracture Morphology of Filament Product
Polylactic acid (PLA) is one of the most used materials in FDM 3D Printing. Large-scale consumption of PLA on an industrial scale could cause environmental and efficiency problems. Thus, PLA waste and industry waste need to be recycled to limit excessive waste. This study aimed to investigate the ch...
Main Authors: | Muhamad Syaifuddin, Heru Suryanto, Suprayitno Suprayitno |
---|---|
Format: | Article |
Language: | English |
Published: |
Universitas Negeri Malang
2021-07-01
|
Series: | Journal of Mechanical Engineering Science and Technology |
Subjects: | |
Online Access: | http://journal2.um.ac.id/index.php/jmest/article/view/22714 |
Similar Items
-
Magnesium Filled Polylactic Acid (PLA) Material for Filament Based 3D Printing
by: Iulian Antoniac, et al.
Published: (2019-03-01) -
Deformation and microstructural evolution of ultrafine- and fine-grained OFHC Cu during dynamic tensile extrusion
by: Keunho Lee, et al.
Published: (2020-09-01) -
Structure and Tensile Strength of Pure Cu after High Pressure Torsion Extrusion
by: Dayan Nugmanov, et al.
Published: (2019-10-01) -
Microstructure and Tensile Properties of AZ61 Alloy Sheets Processed by High-Ratio Extrusion with Subsequent Direct Aging Treatment
by: Cheng-Cheng Zhang, et al.
Published: (2018-05-01) -
Modifying microstructures and tensile properties of Mg-Sm based alloy via extrusion ratio
by: Kai Guan, et al.
Published: (2021-05-01)