Analysis of Microstructure and Mechanical Properties Changes in AA1050 Aluminum Subjected to ECAP and KoBo Processes / Analiza Zmian Mikrostruktury I Własności Mechanicznych Aluminium AA1050 Po Procesie ECAP I KoBo

Analysis of the results of the microstructure and the mechanical properties change in AA1050 aluminum alloy of technical purity processed using ECAP (Equal Channel Angular Pressing) and KoBo deformation methods are presented in the paper.. ECAP process was performed according to Bc scheme in the ran...

Full description

Bibliographic Details
Main Authors: Bogucki R., Sulikowska K., Bieda M., Ostachowski P., Sztwiertnia K.
Format: Article
Language:English
Published: Polish Academy of Sciences 2015-12-01
Series:Archives of Metallurgy and Materials
Subjects:
SPD
Online Access:http://www.degruyter.com/view/j/amm.2015.60.issue-4/amm-2015-0489/amm-2015-0489.xml?format=INT
Description
Summary:Analysis of the results of the microstructure and the mechanical properties change in AA1050 aluminum alloy of technical purity processed using ECAP (Equal Channel Angular Pressing) and KoBo deformation methods are presented in the paper.. ECAP process was performed according to Bc scheme in the range from 1 up to 10 passes. Changes of microstructure were analyzed using scanning electrone microscope equipped with electron backscattered diffraction (EBSD) system. Microstructure and fraction of high-angle grain boundaries in KoBo processed samples were similar to those observed in ECAP processed samples after four passes. The most significant microstructure refinement was observed in ECAP processed sample submitted to 10 passes. In ECAP method the systematic increase of mechanical properties was observed along with increase of deformation degree.
ISSN:2300-1909