Kinetics and Isotherm Modeling for the Treatment of Rubber Processing Effluent Using Iron (II) Sulphate Waste as a Coagulant
There is increasing concern to determine an alternative coagulant for treating industrial effluent with minimal environmental impact and operational cost. In this study, iron (II) sulphate heptahydrate (FeSO<sub>4</sub>·7H<sub>2</sub>O) waste, an industrial byproduct from a t...
Main Authors: | Rahmat Ngteni, Md. Sohrab Hossain, Mohd Omar Ab Kadir, Ahmad Jaril Asis, Zulhafiz Tajudin |
---|---|
Format: | Article |
Language: | English |
Published: |
MDPI AG
2020-06-01
|
Series: | Water |
Subjects: | |
Online Access: | https://www.mdpi.com/2073-4441/12/6/1747 |
Similar Items
-
Impact of Sulphate Ions Content on Performance of Maleic and Acrylic Superplasticizers in Cement Paste
by: Elżbieta Janowska-Renkas
Published: (2021-05-01) -
Identification of NO<sub>2</sub> and SO<sub>2</sub> Pollution Hotspots and Sources in Jiangsu Province of China
by: Yu Wang, et al.
Published: (2021-09-01) -
Comparative Performance of Catalytic Fenton Oxidation with Zero-Valent Iron (Fe(0)) in Comparison with Ferrous Sulphate for the Removal of Micropollutants
by: Anuradha Goswami, et al.
Published: (2019-05-01) -
Differentiating Nanomaghemite and Nanomagnetite and Discussing Their Importance in Arsenic and Lead Removal from Contaminated Effluents: A Critical Review
by: Juan A. Ramos-Guivar, et al.
Published: (2021-09-01) -
H<sub>2</sub>O and/or SO<sub>2</sub> Tolerance of Cu-Mn/SAPO-34 Catalyst for NO Reduction with NH<sub>3</sub> at Low Temperature
by: Guofu Liu, et al.
Published: (2019-03-01)