Analysis of Woven Fabric at the Place of the Sewn Seam
Key importance and the role of sewn seam in the woven fabric are presented. Fabric properties in the places joined with the sewn seam on which garment durability, applicability, appearance and quality depend are highlighted. Seam location is usually the weakest spot on the garment, especially when t...
Main Authors: | , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Sciendo
2018-09-01
|
Series: | Autex Research Journal |
Subjects: | |
Online Access: | https://doi.org/10.1515/aut-2017-0022 |
id |
doaj-a8addb7155b942d5b61f07321e1b8b75 |
---|---|
record_format |
Article |
spelling |
doaj-a8addb7155b942d5b61f07321e1b8b752021-09-06T19:40:22ZengSciendoAutex Research Journal2300-09292018-09-0118321622010.1515/aut-2017-0022aut-2017-0022Analysis of Woven Fabric at the Place of the Sewn SeamRogina-Car Beti0Schwarz Ivana1Kovačević Stana2University of Zagreb, Faculty of Textile Technology, Department for Clothing Technology, Prilaz baruna Filipovića 28a, 10 000Zagreb, Croatia, phone: 385 137 12 574, fax: 358 1 37 12 599University of Zagreb, Faculty of Textile Technology, Department of Textile Design and Management, Prilaz baruna Filipovića 28a, 10 000Zagreb, Croatia, phone: 385 137 12 574, fax: 358 1 37 12 599University of Zagreb, Faculty of Textile Technology, Department of Textile Design and Management, Prilaz baruna Filipovića 28a, 10 000Zagreb, Croatia, phone: 385 137 12 574, fax: 358 1 37 12 599Key importance and the role of sewn seam in the woven fabric are presented. Fabric properties in the places joined with the sewn seam on which garment durability, applicability, appearance and quality depend are highlighted. Seam location is usually the weakest spot on the garment, especially when the great loads are present at these places. Mechanical properties of the sewn fabrics were investigated in different test conditions. The influence of the load on the sewn seam is analyzed in time intervals. Sample with seam have approximately 70% lower breaking properties (breaking force and elongation at break) than the sample without seam. By preloading the seam fabrics with 30%, 50% and 70% of elongation at break, for a 3-h period, the effect on mechanical properties were tested and the differences in pre-stretching intensity were observed. By conducting such test, it is expected that the fabric experience further degradation and that breaking properties further reduce, but the exact opposite occurred (breaking properties, by increasing the preload, increase even more), because of various material properties (structural fabric properties, raw material characteristics, seam characteristics).https://doi.org/10.1515/aut-2017-0022sewn seammechanical propertiesloadingwool/polyester woven fabric |
collection |
DOAJ |
language |
English |
format |
Article |
sources |
DOAJ |
author |
Rogina-Car Beti Schwarz Ivana Kovačević Stana |
spellingShingle |
Rogina-Car Beti Schwarz Ivana Kovačević Stana Analysis of Woven Fabric at the Place of the Sewn Seam Autex Research Journal sewn seam mechanical properties loading wool/polyester woven fabric |
author_facet |
Rogina-Car Beti Schwarz Ivana Kovačević Stana |
author_sort |
Rogina-Car Beti |
title |
Analysis of Woven Fabric at the Place of the Sewn Seam |
title_short |
Analysis of Woven Fabric at the Place of the Sewn Seam |
title_full |
Analysis of Woven Fabric at the Place of the Sewn Seam |
title_fullStr |
Analysis of Woven Fabric at the Place of the Sewn Seam |
title_full_unstemmed |
Analysis of Woven Fabric at the Place of the Sewn Seam |
title_sort |
analysis of woven fabric at the place of the sewn seam |
publisher |
Sciendo |
series |
Autex Research Journal |
issn |
2300-0929 |
publishDate |
2018-09-01 |
description |
Key importance and the role of sewn seam in the woven fabric are presented. Fabric properties in the places joined with the sewn seam on which garment durability, applicability, appearance and quality depend are highlighted. Seam location is usually the weakest spot on the garment, especially when the great loads are present at these places. Mechanical properties of the sewn fabrics were investigated in different test conditions. The influence of the load on the sewn seam is analyzed in time intervals. Sample with seam have approximately 70% lower breaking properties (breaking force and elongation at break) than the sample without seam. By preloading the seam fabrics with 30%, 50% and 70% of elongation at break, for a 3-h period, the effect on mechanical properties were tested and the differences in pre-stretching intensity were observed. By conducting such test, it is expected that the fabric experience further degradation and that breaking properties further reduce, but the exact opposite occurred (breaking properties, by increasing the preload, increase even more), because of various material properties (structural fabric properties, raw material characteristics, seam characteristics). |
topic |
sewn seam mechanical properties loading wool/polyester woven fabric |
url |
https://doi.org/10.1515/aut-2017-0022 |
work_keys_str_mv |
AT roginacarbeti analysisofwovenfabricattheplaceofthesewnseam AT schwarzivana analysisofwovenfabricattheplaceofthesewnseam AT kovacevicstana analysisofwovenfabricattheplaceofthesewnseam |
_version_ |
1717768709693505536 |