Tensile properties of duplex UNS S32205 and lean duplex UNS S32304 steels and the influence of short duration 475 ºC aging
Duplex stainless steels are high strength and corrosion resistant steels extensively used in the petrochemical and chemical industries. The aging at 475 ºC for long periods of time provokes embrittlement and deterioration of corrosion resistance. However, short duration aging at 475 ºC may be used a...
| Published in: | Materials Research |
|---|---|
| Main Authors: | Sérgio Souto Maior Tavares, Juan Manuel Pardal, Hamilton Ferreira Gomes de Abreu, Cristiana dos Santos Nunes, Manoel Ribeiro da Silva |
| Format: | Article |
| Language: | English |
| Published: |
Associação Brasileira de Metalurgia e Materiais (ABM); Associação Brasileira de Cerâmica (ABC); Associação Brasileira de Polímeros (ABPol)
2012-12-01
|
| Subjects: | |
| Online Access: | http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392012000600006 |
Similar Items
Analysis of the Crystallographic Microtexture of a UNS S32205 and a UNS S32304 Duplex Stainless Steels After Cold Rolling and Heat Treatment
by: Karina Aparecida Martins Barcelos Gonçalves, et al.
Published: (2018-07-01)
by: Karina Aparecida Martins Barcelos Gonçalves, et al.
Published: (2018-07-01)
Relationship between microstructure and fracture types in a UNS S32205 duplex stainless steel
by: Maria Victoria Biezma, et al.
Published: (2013-06-01)
by: Maria Victoria Biezma, et al.
Published: (2013-06-01)
Optimization of duplex stainless steel UNS S32205 end milling with noise factor analysisy
by: Wander Pinto Ribeiro, et al.
Published: (2024-09-01)
by: Wander Pinto Ribeiro, et al.
Published: (2024-09-01)
Effect of Warm Rolling on the Corrosion and Mechanical Properties of UNS S32205 Duplex Stainless Steel
by: Dalila Chaves Sicupira, et al.
Published: (2019-09-01)
by: Dalila Chaves Sicupira, et al.
Published: (2019-09-01)
475 °C Embrittlement in a duplex stainless steel UNS S31803
by: S.S.M. Tavares, et al.
Published: (2001-10-01)
by: S.S.M. Tavares, et al.
Published: (2001-10-01)
Microstructural Evolution of UNS S32205 Duplex Stainless Steel During Cold Rolling and Subsequent Annealing
by: C. Gauss, et al.
Published: (2025-02-01)
by: C. Gauss, et al.
Published: (2025-02-01)
Effect of polarization potential on tribocorrosion behavior of duplex stainless steel UNS S32205 in NaCl solution
by: Jomar José Knaip Ribeiro, et al.
Published: (2025-05-01)
by: Jomar José Knaip Ribeiro, et al.
Published: (2025-05-01)
Effect of manganese addition on resistance to pitting corrosion of duplex stainless steel S32205
by: ZHENG Jian-chao, et al.
Published: (2019-02-01)
by: ZHENG Jian-chao, et al.
Published: (2019-02-01)
Characterization of the Austenite Reformation Mechanisms as a Function of the Initial Ferritic State in a UNS S32304 Duplex Stainless Steel
by: Charles Henrique Xavier Morais Magalhães, et al.
Published: (2017-08-01)
by: Charles Henrique Xavier Morais Magalhães, et al.
Published: (2017-08-01)
Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds
by: G. Magudeeswaran, et al.
Published: (2014-09-01)
by: G. Magudeeswaran, et al.
Published: (2014-09-01)
Corrosion Behavior of Duplex and Lean Duplex Stainless Steels in Pulp Mill
by: Luiza Esteves, et al.
Published: (2017-12-01)
by: Luiza Esteves, et al.
Published: (2017-12-01)
Study on welding thermal cycle and residual stress of UNS S32304 duplex stainless steel selected as external shield for a transport packaging of Mo-99
by: Evandro Giuseppe Betini, et al.
Published: (2019-02-01)
by: Evandro Giuseppe Betini, et al.
Published: (2019-02-01)
Evaluation of Abrasive Wear in UNS S32101 and S32750 Duplex Stainless Steels Submitted to Friction Stir Processing
by: Igor Jordão Marques, et al.
by: Igor Jordão Marques, et al.
A constitutive model for the uniaxial tensile plastic behavior of metals based on the instantaneous strain-hardening exponent
by: Tiago Bristt Gonoring, et al.
Published: (2022-09-01)
by: Tiago Bristt Gonoring, et al.
Published: (2022-09-01)
Flexural Strength of RHS Perforated Lean Duplex Stainless Steel Beam at Temperature 24-900ºC
by: Kelsen Andrian Priestley, et al.
Published: (2024-03-01)
by: Kelsen Andrian Priestley, et al.
Published: (2024-03-01)
Achievement of high strength-ductility combination in austenitic and ferritic duplex stainless steel by heterogeneous deformation
by: Ming Chen, et al.
Published: (2022-11-01)
by: Ming Chen, et al.
Published: (2022-11-01)
Martensite reversion and strain hardening of a 2304 lean duplex stainless steel subjected to cold rolling and isochronous annealing at low temperatures
by: Renata Mangini Santos, et al.
Published: (2022-01-01)
by: Renata Mangini Santos, et al.
Published: (2022-01-01)
Evaluation of 475 °C embrittlement in UNS S32750 super duplex stainless steel using four-point electric conductivity measurements
by: Gildardo Gutiérrez-Vargas, et al.
Published: (2021-09-01)
by: Gildardo Gutiérrez-Vargas, et al.
Published: (2021-09-01)
Initial Deformation Behaviors in Lean Duplex Stainless Steel
by: Rosa Kim, et al.
Published: (2020-07-01)
by: Rosa Kim, et al.
Published: (2020-07-01)
Transient Liquid Phase Bonding of Al-6063 to Steel Alloy UNS S32304
by: Mohamed I. Saleh, et al.
Published: (2018-09-01)
by: Mohamed I. Saleh, et al.
Published: (2018-09-01)
Tensile Properties and Fracture Analysis of Duplex (2205) and Super Duplex (2507) Stainless Steels, Produced via Laser Powder Bed Fusion Additive Manufacturing
by: Leonidas Karavias, et al.
Published: (2024-07-01)
by: Leonidas Karavias, et al.
Published: (2024-07-01)
Rietveld and Impedance Analysis of Cold and Hot Rolled Duplex and Lean Duplex Steels for Application in Paper and Pulp Industry
by: Luiza Esteves, et al.
Published: (2016-11-01)
by: Luiza Esteves, et al.
Published: (2016-11-01)
Adaptive Full-Duplex and Half-Duplex Power Line Relay and Power Optimization Allocation Algorithm
by: Zhixiong CHEN, et al.
Published: (2021-06-01)
by: Zhixiong CHEN, et al.
Published: (2021-06-01)
High-throughput first-principles study on the effect of Ni segregation on the formation of Cr-depleted zone and corrosion resistance of S32205 duplex stainless steels
by: Zekun Xu, et al.
Published: (2024-05-01)
by: Zekun Xu, et al.
Published: (2024-05-01)
Half-Duplex and Full-Duplex DF Wireless Energy Harvesting Relaying in Rayleigh Fading
by: Hui Sun, et al.
Published: (2022-06-01)
by: Hui Sun, et al.
Published: (2022-06-01)
On Joint Sub-channel Allocation, Duplexing Mode Selection, and Power Control in Full-Duplex Co-Channel Femtocell Networks
by: M. Rasti, et al.
Published: (2018-06-01)
by: M. Rasti, et al.
Published: (2018-06-01)
Improvement of the Corrosion Resistance by Addition of Ni in Lean Duplex Stainless Steels
by: Heon-Young Ha, et al.
Published: (2020-07-01)
by: Heon-Young Ha, et al.
Published: (2020-07-01)
Optimizing Cellular Network Binary Rate and Fairness: Examination of a Two-Tier Hybrid Duplex Architecture Employing Full-Duplex and Half-Duplex Modes
by: Muhammad Mujtaba Shaikh, et al.
Published: (2024-01-01)
by: Muhammad Mujtaba Shaikh, et al.
Published: (2024-01-01)
Equilibrium solid solubility of nitrides in the matrix of lean duplex stainless steel 2101
by: FENG Zhi-hui, et al.
Published: (2016-12-01)
by: FENG Zhi-hui, et al.
Published: (2016-12-01)
Heterogeneous Microstructure Provides a Good Combination of Strength and Ductility in Duplex Stainless Steel
by: Jingran Yang, et al.
Published: (2024-02-01)
by: Jingran Yang, et al.
Published: (2024-02-01)
“Duplex sans duplex: a cryptic cause”: a case report
by: S. Rajkiran Raju, et al.
Published: (2023-11-01)
by: S. Rajkiran Raju, et al.
Published: (2023-11-01)
Duplex Hemodinamic evaluation of hepatosplenic mansoni schistosomiasis
by: D. C. Paranaguá-Vezozzo, et al.
Published: (1992-01-01)
by: D. C. Paranaguá-Vezozzo, et al.
Published: (1992-01-01)
Stress Corrosion Cracking Mechanisms of UNS S32205 Duplex Stainless Steel in Carbonated Solution Induced by Chlorides
by: Ulises Martin, et al.
Published: (2023-03-01)
by: Ulises Martin, et al.
Published: (2023-03-01)
Pitting and Crevice Corrosion Behavior of the Duplex Stainless Steel UNS S32205 Welded by Using the GTAW Process
by: Yamid E. Nuñez de la Rosa, et al.
Published: (2022-11-01)
by: Yamid E. Nuñez de la Rosa, et al.
Published: (2022-11-01)
Ureterolithiasis in unilateral duplex kidney with completely duplicated ureters
by: Hung-Hsiang Huang, et al.
Published: (2022-10-01)
by: Hung-Hsiang Huang, et al.
Published: (2022-10-01)
Three-Mode Opportunistic Full-Duplex Switching
by: Hyungseop Son, et al.
Published: (2024-01-01)
by: Hyungseop Son, et al.
Published: (2024-01-01)
Fast Electrical Balance Duplexer Tuning Using Neural Networks for RF Self-Interference Cancellation in In-Band Full-Duplex Systems
by: Hyunjin Kim, et al.
Published: (2024-01-01)
by: Hyunjin Kim, et al.
Published: (2024-01-01)
Integrity Assessment of Stress Corrosion Cracking Susceptibility of Duplex UNS S32205 and Austenitic UNS S31653 Stainless Steel Reinforcements
by: Ulises Martin, et al.
Published: (2023-11-01)
by: Ulises Martin, et al.
Published: (2023-11-01)
Bilateral duplex kidney and ureter with multiple stones: a case report
by: Guoqing Liu, et al.
Published: (2024-10-01)
by: Guoqing Liu, et al.
Published: (2024-10-01)
Optimization of ultimate tensile strength of welded Inconel 625 and duplex 2205
by: S. Madhankumar, et al.
Published: (2021-03-01)
by: S. Madhankumar, et al.
Published: (2021-03-01)
Similar Items
-
Analysis of the Crystallographic Microtexture of a UNS S32205 and a UNS S32304 Duplex Stainless Steels After Cold Rolling and Heat Treatment
by: Karina Aparecida Martins Barcelos Gonçalves, et al.
Published: (2018-07-01) -
Relationship between microstructure and fracture types in a UNS S32205 duplex stainless steel
by: Maria Victoria Biezma, et al.
Published: (2013-06-01) -
Optimization of duplex stainless steel UNS S32205 end milling with noise factor analysisy
by: Wander Pinto Ribeiro, et al.
Published: (2024-09-01) -
Effect of Warm Rolling on the Corrosion and Mechanical Properties of UNS S32205 Duplex Stainless Steel
by: Dalila Chaves Sicupira, et al.
Published: (2019-09-01) -
475 °C Embrittlement in a duplex stainless steel UNS S31803
by: S.S.M. Tavares, et al.
Published: (2001-10-01)
