Process Practice of a 90 t Ladle Wire Feeding

The process practice of silicon-calcium wire(φ13 mm)feeding and aluminum wire feeding with feeding speed 2.4~3.0 m/min in a 90 t ladle for stcel 20,34Mn6 and steel BTN/1 produced by LD-LF(WF)-CC flow sheet has been summarized. The practice showed that as calcium feeding amount was up to 200×10<su...

Full description

Bibliographic Details
Published in:	Teshugang
Main Authors:	Zhao Baoguo, Lan Yueguang, Wang Tianyao
Format:	Article
Language:	Chinese
Published:	Editorial Office of Special Steel 2006-03-01
Subjects:	Ladle Refining Wire Feeding
Online Access:	http://www.specialsteeljournal.com/thesisDetails?columnId=129768523&Fpath=home&index=0

Similar Items

Practice for Refining Process of 92 t Ladle Furnace for Tube Bloom Steel J55
by: Wang Haibing
Published: (2005-04-01)

The Influence of Technological Parameters of X70 Stainless Steel Ladle Refining on the Residual Content of Non-Metallic Inclusions
by: Babanin A., et al.
Published: (2015-09-01)

Research on Characteristics of 40 t Ladle Bottom Gas Blowing Process by Water Modeling
by: Ou Xiulong, et al.
Published: (2020-05-01)

Modernization of ladle refining area in order to expand the steel grades. Methods of ladle refining of steel, peculiarities of low-carbon alloyed steel grades production. Message 1. Implementation of the project for modernization of steel ladle refining area
by: I. V. Pivtsaev, et al.
Published: (2023-09-01)

THE FOUNDRY INOCULANT CONTAINING ALKALI-EARTH METAL FOR LADLE REFINING
by: I. V. Provorova, et al.
Published: (2016-08-01)

Study of Assimilation of Cored Wire into Liquid Steel Baths
by: Edgar-Ivan Castro-Cedeno, et al.
Published: (2024-04-01)

Mass-Transfer Model for Steel, Slag, and Inclusions during Ladle-Furnace Refining
by: Zhu Liguang, et al.
Published: (2018-07-01)

VISUALISATION AND ANALYSIS OF THE FLUID FLOW STRUCTURE INSIDE AN ELLIPTICAL STEELMAKING LADLE THROUGH IMAGE PROCESSING TECHNIQUES
by: R.P. NUNES, et al.
Published: (2007-08-01)

Fluid Flow Turbulence in the Proximities of the Metal-Slag Interface in Ladle Stirring Operations
by: Fabian Andrés Calderón-Hurtado, et al.
Published: (2019-02-01)

Fundamental Research on Fluorine-Free Ladle Furnace Slag for Axle Steel of Electric Multiple Unit Vehicles
by: Qing Zhao, et al.
Published: (2021-12-01)

Inclusion Removements in a Bottom-Stirring Ladle with Novel Slot-Porous Matched Dual Plugs
by: Xianglong Li, et al.
Published: (2022-01-01)

Utilization of casting ladle lining enthalpy for heating gas savings in the course of ladle preheating
by: D. Jančar, et al.
Published: (2014-04-01)

Modelling of Technological Parameters of Aluminium Melt Refining in the Ladle by Blowing of Inert Gas through the Rotating Impeller
by: Josef Walek, et al.
Published: (2021-02-01)

Modelling of hydrodynamic phenomena occurring in refining ladles for high-carbon Fe-Si alloys
by: T. Merder, et al.
Published: (2024-01-01)

Simulation study on the influence of thickness and relative foaming height of refining slag on electrothermal characteristics in ladle furnace
by: Zhaozhao Yan, et al.
Published: (2023-11-01)

A Test and Study on Water Modelling for Optimization of Bottom Argon Blowing Process of a 90 t Ladle Furnace
by: Ding Ning, et al.
Published: (2010-11-01)

Prediction of Remaining Molten Steel Volume during the Process of Ladle Slag Carry-over Based on SMOGN-XGBoost
by: Fan Shixi, et al.
Published: (2025-01-01)

New Process with Argon Injected into Ladle around the Tapping Hole for Controlling Slag Carry-over during Continuous Casting Ladle
by: Shuguo Zheng, et al.
Published: (2018-08-01)

Study on Ladle Baking Process with Oxygen-fuel Combustion
by: Xiaoyao Wang, et al.
Published: (2025-02-01)

Hydraulic properties of ladle slags
by: J. Vlček, et al.
Published: (2016-07-01)

Deterioration mechanism of Al2O3–MgO refractory castable in RH refining ladle
by: Junfeng Chen, et al.
Published: (2023-12-01)

Water Simulation Test for Feeding Calcium Wire by Gas Rotary Feeding Lance
by: Yan Qinghua, et al.
Published: (2012-10-01)

Numerical Simulation of Tracer Transport Process in Alternate Stirring Ladle
by: Hongyu QI, et al.
Published: (2023-01-01)

A Study on the Effect of Ladle Structures and Stirrer Positions on the Internal Flow Field in the Hot Metal Desulfurization Process
by: Lifei Wang, et al.
Published: (2025-01-01)

Practical Application of Dispersion Breathable Brick in 70 t Refining Ladle
by: Huang Guotao, et al.
Published: (2025-01-01)

Automatic Ladle Tracking with Object Detection and OCR in Steel Melting Shops
by: Kabil Murugan, et al.
Published: (2025-06-01)

ON OPTIMIZATION OF STEELMAKING IN ELECTRIC ARC FURNACE AND ITS LADLE TREATMENT IN LADLE-FURNACE
by: Alexander Yuryevich Kem, et al.
Published: (2014-06-01)

Process Practice of Hot Forging Microalloying Steel F40MnV by Converter
by: Dai Guanwen, et al.
Published: (2005-05-01)

Hot Metal Temperature Prediction During Desulfurization in the Ladle
by: Milan Durdán, et al.
Published: (2024-12-01)

Use of Numerical Methods for the Design of Thermal Protection of an RFID-Based Contactless Identification System of Ladles
by: Dalibor Jančar, et al.
Published: (2022-07-01)

The Influence of Parameters of Argon Purging Process Through Ladle on the Phenomena Occuring in the Area of Phase Distributions: Liquid Steel-Slag
by: J. Pieprzyca, et al.
Published: (2019-06-01)

EVOLUTION OF PERFORMANCE OF REFRACTORY LINING FOR THE SLAG LINE OF STEEL LADLES AT USIMINAS IPATINGA
by: Sávia Cristina Lacerda Poubel Bastos, et al.
Published: (2012-12-01)

Numerical Simulation of the Solid Particle Entrainment Behavior in Bottom-Blown Ladle
by: Cheng Wang, et al.
Published: (2025-08-01)

Industrial experimental study on the formation of microbubbles by argon injection into ladle shroud
by: Jian-hua LIU, et al.
Published: (2022-07-01)

Current research and latest developments on refractories used as ladle linings
by: WANG En-hui, et al.
Published: (2019-06-01)

Dissolution of Microalloying Elements in a Ladle Metallurgy Furnace
by: Ogochukwu Queeneth Duruiheme, et al.
Published: (2023-02-01)

Mathematical identification of homogenisation processes in argon stirred ladle
by: K. Michalek, et al.
Published: (2009-10-01)

Complex Model for Hot Metal Temperature Prediction: Torpedo Car and Ladle Processes
by: Milan Durdán, et al.
Published: (2025-06-01)

Mixing Time Prediction in a Ladle Furnace
by: Xipeng Guo, et al.
Published: (2024-04-01)

Numerical Simulation of Bottom Argon Blowing Process for 130 Ton Ladle
by: Li Qi, et al.
Published: (2024-09-01)