The impact of chemical short-range order on the thermophysical properties of medium- and high-entropy alloys

The unusual behavior observed in the coefficient of thermal expansion and specific heat capacity of CrFeNi, CoCrNi, and CoCrFeNi medium/high-entropy alloys is commonly referred to as the K-state effect. It is shown to be independent of the Curie temperature, as demonstrated by temperature-dependent...

Full description

Bibliographic Details
Published in:	Materials & Design
Main Authors:	Angelo F. Andreoli, Andrea Fantin, Sergey Kasatikov, Vinícius P. Bacurau, Michael Widom, Piter Gargarella, Eric M. Mazzer, Thomas G. Woodcock, Kornelius Nielsch, Francisco G. Coury
Format:	Article
Language:	English
Published:	Elsevier 2024-02-01
Subjects:	High-entropy alloys Chemical short-range order Dilatometry Differential scanning calorimetry Order-disorder effects
Online Access:	http://www.sciencedirect.com/science/article/pii/S0264127524000960

Similar Items

Transport Properties of Equiatomic CoCrFeNi High-Entropy Alloy with a Single-Phase Face-Centered Cubic Structure
by: Victor A. Bykov, et al.
Published: (2023-11-01)

How Atomic Bonding Plays the Hardness Behavior in the Al–Co–Cr–Cu–Fe–Ni High Entropy Family
by: Andrea Fantin, et al.
Published: (2024-02-01)

Changes of thermal, mechanical and magnetic properties of an amorphous Fe80Cr5B15 alloy during magnetic and structural phase transitions
by: Kamasa Paweł, et al.
Published: (2006-06-01)

Influence of the cooling rate below Ms on the martensitic transformation in a low alloy medium-carbon steel
by: J.H. Liu, et al.
Published: (2021-05-01)

Study of bainite and martensite tempering in a medium C high Si steel. microstructural disparities and equilibrium convergence
by: Mattia Franceschi, et al.
Published: (2024-09-01)

A Dilatometric Study of the Influence of Residual Iron Content on the Annealing Behavior of Cartridge Brass
by: Victor Caso Moreira, et al.
Published: (2016-03-01)

Crystal Plasticity Model Analysis of the Effect of Short-Range Order on Strength-Plasticity of Medium Entropy Alloys
by: Chen Li, et al.
Published: (2022-10-01)

Evolution of short-range order and dynamics of medium-range order influence on the glass-forming ability of CuZrAg alloys
by: Lisha Huang, et al.
Published: (2024-07-01)

Quantifying chemical fluctuations around medium-range orders and its impact on dislocation interactions in equiatomic CrCoNi medium entropy alloy
by: Guogao Tang, et al.
Published: (2023-01-01)

Dilatometry of Steel for the Production of 5.56 mm Calibre Rifle Barrels
by: Andrzej DĘBSKI, et al.
Published: (2021-12-01)

The Effect of Nitrogen Linear Flow on Lubricant Removal and Sintering Densification of Alumix 431D Grade Powder
by: Jan Kazior, et al.
Published: (2021-08-01)

Chemical ordering beyond the superstructure in long-range ordered systems
by: Markus Stana, et al.
Published: (2016-01-01)

Structural Principles in Liquids and Glasses: Bottom-Up or Top-Down
by: Takeshi Egami, et al.
Published: (2022-06-01)

Impact of selected tramp elements in medium carbon steels on the deformation behavior of non-metallic inclusions and phase transformations
by: Julian Cejka, et al.
Published: (2025-05-01)

Kinetics of austenite formation during continuous heating in as-cast and as-annealed conditions in a low carbon steel
by: Antonio Oliver-Reynoso, et al.
Published: (2025-01-01)

Continuous Cooling Transformation of Tool Steels X153CrMoV12 and 100MnCrW4: Analysis of Microstructure and Hardness Changes
by: Michal Krbata, et al.
Published: (2025-02-01)

Fire Resistance Behaviour of Geopolymer Concrete: An Overview
by: Salmabanu Luhar, et al.
Published: (2021-02-01)

Laser-dilatometer calibration using a single-crystal silicon sample
by: Ines Hamann, et al.
Published: (2019-01-01)

Quenching and Partitioning of Multiphase Aluminum-Added Steels
by: Tuomo Nyyssönen, et al.
Published: (2019-03-01)

Cold-rolled multiphase boron steels: microstructure and mechanical properties
by: Fábio Dian Murari, et al.
Published: (2015-04-01)

Effect of two-step ausforming on bainite transformation and retained austenite in a medium-carbon bainitic steel
by: Guanghui Chen, et al.
Published: (2020-01-01)

Medium-Range Order Resists Deformation in Metallic Liquids and Glasses
by: Takeshi Egami, et al.
Published: (2023-02-01)

Tailoring short-range order and dislocation evolution in Cr–Co–Ni medium-entropy alloys: A molecular dynamics study
by: Asker Jarlöv, et al.
Published: (2024-04-01)

Short-to-medium-range order in amorphous nanocatalysts
by: Geng Wu, et al.
Published: (2023-11-01)

Exploring Structural Changes in Ge-Te Amorphous Films Through Small-Angle Neutron Scattering
by: Andrea A. Piarristeguy, et al.
Published: (2024-12-01)

Statistical process control for data without inherent order
by: Poots Alan J, et al.
Published: (2012-08-01)

Influence of Quenching and Partitioning Parameters on Phase Transformations and Mechanical Properties of Medium Manganese Steel for Press-Hardening Application
by: Charline Blankart, et al.
Published: (2021-11-01)

Thermal and phase transformations analysis in a PREMOMET® steel
by: M. Torres-López, et al.
Published: (2017-01-01)

Microstructure Evolution of Cold-Rolled Carbide-Free Bainite Steel Sheets During Continuous Annealing Process
by: Bahareh Mobedpour, et al.
Published: (2025-01-01)

Phase transformation sequence and kinetics of ω formation in Ti-3573 titanium alloy during continuous heating
by: Chenjiong Gao, et al.
Published: (2024-03-01)

Sintering densification curve: A practical approach for its construction from dilatometric shrinkage data
by: Maca K., et al.
Published: (2008-01-01)

Thermal expansion behaviour of Invar 36 alloy parts fabricated by wire-arc additive manufacturing
by: E. Aldalur, et al.
Published: (2022-07-01)

In situ characterization of hydrogen absorption in nanoporous palladium produced by dealloying
by: Eva-Maria Steyskal, et al.
Published: (2016-08-01)

A novel study of the effect of temperature on the crystal structure of lithium aluminosilicate materials
by: Rut Benavente, et al.
Published: (2021-09-01)

The Effect of Initial Structure on Phase Transformation in Continuous Heating of a TA15 Titanium Alloy
by: Xiaoguang Fan, et al.
Published: (2017-06-01)

Virtual Angstrom-Beam Electron Diffraction Analysis for Zr<sub>80</sub>Pt<sub>20</sub> Metallic Glasses
by: Akihiko Hirata
Published: (2022-09-01)

Ordering Alloys with Micro- and Nanoscale Structures Based on Cubic Lattices: Mechanical and Thermodynamic Properties
by: M.A. Latypova and Z.S. Gelmanova
Published: (2025-02-01)

Assessing the scale contributing factors of three carbide-free bainitic steels: A complementary theoretical and experimental approach
by: Adriana Eres-Castellanos, et al.
Published: (2021-01-01)

Ordering Phase Transition with Symmetry-Breaking from Disorder over Non-Equivalent Sites: Calorimetric and Crystallographic Study of Crystalline <span style="font-variant: small-caps;">d</span>-Sorbose
by: Sakiko Iwagaki, et al.
Published: (2020-05-01)

Effects of Chemical Short-Range Order and Lattice Distortion on Crack-Tip Behavior of Medium-Entropy Alloy by Atomistic Simulations
by: Xiuju Zhu, et al.
Published: (2024-02-01)