A High-Relative-Bandwidth Doherty Power Amplifier with Modified Load Modulation Network for Wireless Communications
This paper presents a novel load modulation network to realize a broadband Doherty power amplifier (DPA). The proposed load modulation network consists of two generalized transmission lines and a modified coupler. A comprehensive theoretical analysis is carried out to explain the operation principle...
| Published in: | Sensors |
|---|---|
| Main Authors: | , , , |
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2023-03-01
|
| Subjects: | |
| Online Access: | https://www.mdpi.com/1424-8220/23/5/2767 |
| Summary: | This paper presents a novel load modulation network to realize a broadband Doherty power amplifier (DPA). The proposed load modulation network consists of two generalized transmission lines and a modified coupler. A comprehensive theoretical analysis is carried out to explain the operation principles of the proposed DPA. The analysis of the normalized frequency bandwidth characteristic shows that a theoretical relative bandwidth of approximately 86% can be obtained across a normalized frequency range of 0.4–1.0. The complete design process that allows the design of the large-relative-bandwidth DPA based on derived parameter solutions is presented. A broadband DPA operating between 1.0 GHz and 2.5 GHz was fabricated for validation. Measurements demonstrate that the DPA can deliver an output power of 43.9–44.5 dBm with a drain efficiency of 63.7–71.6% in the 1.0–2.5 GHz frequency band at the saturation level. Moreover, a drain efficiency of 45.2–53.7% can be obtained at the 6 dB power back-off level. |
|---|---|
| ISSN: | 1424-8220 |