Active flux tungsten inert gas welding of austenitic stainless steel AISI 304

The paper presents the effects of flux assisted tungsten inert gas (A-TIG) welding of 4 (10) mm thick austenitic stainless steel EN X5CrNi1810 (AISI 304) in the butt joint. The sample dimensions were 300 ´ 50 mm, and commercially available active flux QuickTIG was used for testing. In the planned st...

Full description

Bibliographic Details
Published in:	Metalurgija
Main Authors:	D. Klobčar, J. Tušek, M. Bizjak, S. Simončič, V. Lešer
Format:	Article
Language:	English
Published:	Croatian Society for Materials Protection 2016-10-01
Subjects:	A-TIG welding austenitic stainless steel QuickTIG active flux microstructure bending test
Online Access:	http://hrcak.srce.hr/file/231945

Similar Items

Effect of Heat Input on Hydrogen Embrittlement of TIG Welded 304 Austenitic Stainless Steel
by: Jinxin Xue, et al.
Published: (2022-11-01)

Suppressing the Use of Critical Raw Materials in Joining of AISI 304 Stainless Steel Using Activated Tungsten Inert Gas Welding
by: Sebastian Balos, et al.
Published: (2019-11-01)

The Effects of TIG Welding Rod Compositions on Microstructural and Mechanical Properties of Dissimilar AISI 304L and 420 Stainless Steel Welds
by: Aziz Barış Başyiğit, et al.
Published: (2018-11-01)

The Effect of Welding Mode Parameters on the Operational Properties of Flexible Compensating Elements Made of Austenitic Stainless Steels
by: Vitaliy Petrovich Ivanov, et al.
Published: (2023-02-01)

The strengthening role of post-welded cryogenic treatment on the performance and microstructure of 304 austenitic stainless steel weldments
by: Chen Cui, et al.
Published: (2024-03-01)

Tungsten inert gas (TIG) welding of aluminum alloy EN AW-AlZn5.5MgCu
by: J. Tušek, et al.
Published: (2016-10-01)

Determination of Tungsten Inert Gas Welding Input Parameters to Attain Maximum Tensile Strength of 316L Austenitic Stainless Steel
by: Moi Subhas Chandra, et al.
Published: (2018-11-01)

Mechanical and micro-structural studies of pulsed and constant current TIG weldments of super duplex stainless steels and Austenitic stainless steels
by: Yelamasetti Balram, et al.
Published: (2024-04-01)

Influence of the surface finish on corrosion resistance of stainless steels through machining and remelting on weld bead
by: Jean Robert Pereira Rodrigues, et al.
Published: (2019-05-01)

Enhancing Welding Productivity and Mitigation of Distortion in Dissimilar Welding of Ferritic-Martensitic Steel and Austenitic Stainless Steel Using Robotic A-TIG Welding Process
by: Tushar Sonar, et al.
Published: (2024-12-01)

Comprehensive analysis of the properties of stainless steel 308l tungsten inert gas wire arc additive manufactured
by: Rauuf Nur Fattah, et al.
Published: (2025-12-01)

Microstructure, mechanical properties and pitting corrosion of TIG weld joints alternative low-cost austenitic stainless steel grade 216
by: Wichan Chuaiphan, et al.
Published: (2020-07-01)

Study on the effect of flux composition on the melting efficiency of A-TIG of AISI 316L stainless steel: Experimental and analytical approaches
by: Peyman Binande, et al.
Published: (2024-11-01)

Effect of Alternating Magnetic Field Intensity on Microstructure and Corrosion Properties of Deposited Metal in 304 Stainless Steel TIG Welding
by: Jinjie Wang, et al.
Published: (2025-07-01)

Comparative Investigation of Friction StirWelding and Tungsten Inert on Gas of 6061T651 Aluminum Alloy Mechanical Property and Microstructure
by: Samer Jasim Mahmood
Published: (2013-06-01)

The Structure And Properties Of Mixed Welded Joints Made Of X10NiCrAlTi32-21 And X6CrNiMoTi17-12-2 Steels
by: Sieczkowski K., et al.
Published: (2015-09-01)

Supervised Machine Learning Models for Predicting SS304H Welding Properties Using TIG, Autogenous TIG, and A-TIG
by: Subhodwip Saha, et al.
Published: (2025-06-01)

A comparative analysis of friction stir and tungsten inert gas dissimilar AA5082-AA7075 butt welds
by: Ratnesh Kumar, et al.
Published: (2022-01-01)

Evaluation of machine learning techniques for the Nd: YAG Laser & TIG welded stainless steel 304
by: Kumar Varun A., et al.
Published: (2024-01-01)

Research on the Formation, Microstructure, and Properties of 304 Stainless Steel AC-DC Hybrid TIG Welding
by: Ying Ye, et al.
Published: (2023-06-01)

COLD ROLLING ORTHODONTIC WIRES OF AUSTENITIC STAINLESS STEEL AISI 304
by: Rodrigo Santos Messner, et al.
Published: (2013-03-01)

Optimization of welding strength in the tungsten inert gas welding process for aluminium alloys
by: Amit Gupta, et al.
Published: (2025-05-01)

Mechanical and Microstructural Characterization of TIG Welded Dissimilar Joints between 304L Austenitic Stainless Steel and Incoloy 800HT Nickel Alloy
by: Grzegorz Rogalski, et al.
Published: (2020-04-01)

Flange joining using friction stir welding and tungsten inert gas welding of AA6082: A comparison based on joint performance
by: Ibrahim Sabry, et al.
Published: (2024-09-01)

Friction welding of 304 austenitic stainless steel tube to tube plate joints using an external tool
by: Subbanchetty PANDIA RAJAN, et al.
Published: (2015-09-01)

Fabrication of Miniature Titanium Capsule for Brachytherapy Sources Using Tungsten Inert Gas (TIG) Method
by: R Naghdi, et al.
Published: (2013-02-01)

Weld Geometry, Mechanical Properties, Microstructure and Chemical Composition of AA6063 in Tungsten Inert Gas Welding with Intermittent Controlled Wire Feeding Method
by: Ario Sunar Baskoro, et al.
Published: (2021-02-01)

Experimental investigation of effect of welding parameters on surface roughness, micro-hardness and tensile strength of AISI 316L stainless steel welded joints using 308L filler material by TIG welding
by: Khubaib Zafar Ghumman, et al.
Published: (2022-11-01)

Effect of periodic ultrasonic vibration on forming and properties of 316L stainless steel’s TIG weld
by: Mingzhu HU, et al.
Published: (2025-08-01)

Investigation of Generatively Manufactured Components in a Sealed Welding Chamber Using the Tungsten Inert Gas Hot Wire Process
by: Silvia Imrich, et al.
Published: (2024-01-01)

In-situ composite formation of vanadium carbide in CrFeCoNiCu high-entropy alloy cladded on AISI304 stainless steel
by: Saeed Hosseini, et al.
Published: (2025-03-01)

Microstructure and mechanical properties of Ti-6321 titanium alloy joint by tungsten inert gas welding
by: YAN Taiqi, et al.
Published: (2024-06-01)

Study of Microstructure, Mechanical, and Corrosion Properties of K-TIG Welded Joints of 2205/316L Dissimilar Stainless Steel
by: Shuwan Cui, et al.
Published: (2025-08-01)

Influence of delta ferrite on corrosion susceptibility of AISI 304 austenitic stainless steel
by: Lawrence O. Osoba, et al.
Published: (2016-12-01)

Dissimilar autogenous TIG joint of Alloy 617 and AISI 304H steel for AUSC application
by: Sachin Sirohi, et al.
Published: (2023-09-01)

Study on Pulsed Gas Tungsten Arc Lap Welding Techniques for 304L Austenitic Stainless Steel
by: Yi Jiang, et al.
Published: (2024-08-01)

Microstructural characteristics and mechanical properties of dissimilar AA5052-H32 and AA5083-H111 alloy joints made using tungsten inert gas welding and ER5356/scandium composite cast filler rod
by: C. Chanakyan, et al.
Published: (2024-10-01)

Microstructural Evaluation of Inconel 718 and AISI 304L Dissimilar TIG Joints
by: Dimitra Ioannidou, et al.
Published: (2023-12-01)

Improving Welding Penetration and Mechanical Properties via Activated-Flux Smearing by Tungsten Inert Gas Arc Welding
by: Shiqi Yue, et al.
Published: (2023-12-01)

FEM based thermal and mechanical analysis of comparative study of TIG and A-TIG welding on P91 steel
by: M. Zubairuddin, et al.
Published: (2025-03-01)