| Summary: | Developing advanced nuclear fuel technologies is critical for high-performance applications such as nuclear thermal propulsion (NTP). This study explores the feasibility of direct ink writing (DIW) for fabricating ceramic pellets for potential nuclear applications. Zirconium carbide (ZrC) is used as a matrix material and vanadium carbide (VC) is used as a surrogate for uranium carbide (UC) in this study. A series of ink formulations were developed with varying concentrations of VC and nanocrystalline cellulose (NCC) to optimize the rheological properties for DIW processing. Post-sintering analysis revealed that conventionally sintered samples at 1750 °C exhibited high porosity (>60%), significantly reducing the compressive strength compared to dense ZrC ceramics. However, increasing VC content improved densification and mechanical properties, albeit at the cost of increased shrinkage and ink flow challenges. Spark plasma sintering (SPS) achieved near-theoretical density (~97%) but introduced geometric distortions and microcracking. Despite these challenges, this study demonstrates that DIW offers a viable route for fabricating ZrC-based ceramic structures, provided that sintering strategies and ink rheology are further optimized. These findings establish a baseline for DIW of ZrC-based materials and offer valuable insights into the porosity control, mechanical stability, and processing limitations of DIW for future nuclear fuel applications.
|
|---|
