Wear rate of epoxy resin reinforced with multi walls carbon nanotubes
In this study, nanocomposites have been prepared by adding multiwall carbon nanotubes (MWCNTs) with weight ratios (0, 2, 3, 4, 5) wt% to epoxy resin. The samples were prepared by hand lay-up method. Influence of an applied load before and after immersion in sodium hydroxide (NaOH) of normality (0.3...
| Published in: | Iraqi Journal of Physics |
|---|---|
| Main Author: | |
| Format: | Article |
| Language: | English |
| Published: |
University of Baghdad
2019-03-01
|
| Subjects: | |
| Online Access: | https://ijp.uobaghdad.edu.iq/index.php/physics/article/view/399 |
| Summary: | In this study, nanocomposites have been prepared by adding
multiwall carbon nanotubes (MWCNTs) with weight ratios (0, 2, 3,
4, 5) wt% to epoxy resin. The samples were prepared by hand lay-up
method. Influence of an applied load before and after immersion in
sodium hydroxide (NaOH) of normality (0.3N) for (15 days) at
laboratory temperature on wear rate of Ep/MWCNTs
nanocomposites was studied. The results showed that wear rate
increases with increasing the applied load for the as prepared and
immersed samples and after immersion. It was also found that epoxy
resin reinforced with MWCNTs has wear rate less than neat epoxy.
The sample (Ep + 5wt% of MWCNTs) has lower wear rate. The
immersion effect in base solution led to increase in wear rate values
for all samples compared to natural condition.
|
|---|---|
| ISSN: | 2070-4003 2664-5548 |