Physical and chemical processes in the application of antifriction coatings by the friction-mechanical method

The current models of antifriction coating formation by finishing antifriction non-abrasive treatment has shown the lack of a thorough analysis of physical and chemical processes occurring in the friction zone. From this point of view, it seems reasonable to study the process of coating formation at...

Full description

Bibliographic Details
Published in:	Проблеми трибології
Main Authors:	A.M. Krasota, I.V. Shepelenko, M.V. Krasota
Format:	Article
Language:	English
Published:	Khmelhitsky National University, Lublin University of Technology 2025-03-01
Subjects:	finishing antifriction non-abrasive treatment, physical model, antifriction coating, process medium, surface activation, tribodestruction, wear resistance
Online Access:	https://tribology.khnu.km.ua/index.php/ProbTrib/article/view/984

Similar Items

Theoretical research of the technology of finishing cylinders with antifriction materials
by: D.D. Marchenko, et al.
Published: (2021-06-01)

Wear Resistance of Antifriction Gas-Thermal Coatings Based on the Cu-Al System under Boundary Friction
by: Alexander N. Grigorchik, et al.
Published: (2023-12-01)

Fretting wear mechanism of antifriction coating with selenium on aluminum alloy
by: Alisin V.V.
Published: (2023-01-01)

The Characterization of Soft Antifriction Coating on the Tin Bronze by Electro-spark Alloying
by: Zhengchuan ZHANG, et al.
Published: (2023-02-01)

PROPERTIES OF POLYMERIC ANTIFRICTION COATINGS IN ACID AQUATIC MEDIA
by: Vadim A. Kokhanovskiy, et al.
Published: (2011-12-01)

RESEARCH OF THE INFLUENCE NANOMODIFICATION ON THE STRUCTURE AND PROPERTIES OF ZINC ANTIFRICTION ALLOYS
by: F. Rudnicki, et al.
Published: (2015-04-01)

Effect of Cu content on the microstructure and properties of sintered Fe-0.8C-xCu antifriction materials
by: Jiaxin Li, et al.
Published: (2024-01-01)

ANTIFRICTION COMPOSITES IN ACTIVE AQUATIC ENVIRONMENTS
by: Ilya Borisovich Vlasenko
Published: (2013-12-01)

The Influence of Substrate, Binder, and Additives on Suspension Coating Properties at Elevated Temperatures
by: Sergey N. Grigoriev, et al.
Published: (2025-01-01)

Antifriction effect of 316L stainless steel textured surface with superhydrophilic properties in brain tissue insertion
by: Chunyang Pan, et al.
Published: (2021-01-01)

Friction properties of C-containing ceramic coatings on an Mg-Li alloy
by: ZHANG Yu-lin, et al.
Published: (2018-05-01)

Investigation of wear resistance of polymer-coated radial bearing running on micropolar lubricant
by: V. I. Kirishchieva, et al.
Published: (2022-11-01)

A Review on Glaze Layers in High Temperature Sliding Friction
by: PENG Yu - chun, CHEN Long, ZHANG Xiang - lei, CHEN Wei, ZHOU Hong - ming
Published: (2022-06-01)

Influence of the Pattern of Coupling of Elements and Antifriction Interlayer Thickness of a Spherical Bearing on Structural Behavior
by: Anna A. Kamenskikh, et al.
Published: (2025-10-01)

Structural transformations and their impact on the mechanical and antifriction properties in the process of alloying graphitized hypereutectoid steel with copper
by: Natalia V. Stepanova, et al.
Published: (2023-10-01)

Evaluation of operational properties of aviation oils by tribological parameters
by: O.O. Mikosianchyk, et al.
Published: (2021-03-01)

Study on Tribological Properties of Solid-Liquid Composite Ball-Lubricated Surfaces
by: TANG Weidong, YU Aibing, QIN Tuo, GUO Xufeng, YE Jiawang, ZHANG Jiawei
Published: (2025-08-01)

Research Progress on the Friction Reduction Characteristics of Surface Texturing Modifications in Sliding Bearings
by: YANG Xiaodong, CHEN Wengang, LI Dongyang, ZHANG Yao, LI Zuyang, DAI Binggui, ZHANG Jihao, YANG Jiawei
Published: (2024-07-01)

Method for Maintaining Technical Condition of Marine Diesel Engine Bearings
by: Sergii Sagin, et al.
Published: (2025-03-01)

Experimental Investigation of Instantaneous Sliding Friction Coefficient of Steel Plane Worm Gear
by: Qiu Xinyang, et al.
Published: (2017-01-01)

Physiochemical Processes to Reduce Friction and Wear Under Selective Transfer Conditions—A Review
by: Filip Ilie, et al.
Published: (2025-03-01)

Investigation of the Wear Resistance of a Journal Bearing with Polymer-Coated Grooved Support Ring
by: V. V. Vasilenko, et al.
Published: (2023-01-01)

Increasing the wear resistance of a radial bearing with a non-standard support profile and polymer coating on the shaft surface taking into account the pressure-viscosity ratio
by: Khaidar N. Abdulrakhman, et al.
Published: (2022-12-01)

Study on modernization processes in the coating metal surfaces (plain bearings) by thermal spraying
by: Elena IRIMIE
Published: (2011-09-01)

Sliding friction unit of connecting-rod end of high-lift plunger pump using self-lubricated bearing from powder antifriction material
by: Marina V. Korchagina, et al.
Published: (2017-03-01)

ИЗНОСОСТОЙКОСТЬ АНТИФРИКЦИОННЫХ ПОКРЫТИЙ ИЗ МЕДНЫХ СПЛАВОВ В РАЗЛИЧНЫХ УСЛОВИЯХ ТРЕНИЯ
by: Григорчик А.Н., et al.
Published: (2024-02-01)

New anti-friction aluminum alloys for cast monometallic plain bearings. Bench tests
by: A. E. Mironov, et al.
Published: (2020-09-01)

Particularities of structure formation of aluminum-copper composite materials manufactured by casting technology
by: V. A. Kalinichenko, et al.
Published: (2020-04-01)

Evaluation of the wear resistance of the modified radial bearing design considering the compressibility and viscosity of the micropolar lubricant
by: M. A. Mukutadze, et al.
Published: (2024-11-01)

Structural design and wear properties of TIG arc brazing tin-based babbit to mild steel
by: Zhou F.M., et al.
Published: (2018-08-01)

Studies on wear resistance of the radial bearing design taking into account rheological properties of micropolar lubricant
by: M. A. Mukutadze, et al.
Published: (2023-09-01)

Technological aspects of creation of composite wear-resistant coatings on iron-containing alloys production with the help of induction welding
by: V. A. Kalinichenko, et al.
Published: (2019-08-01)

MoS2 nanoparticles grown on carbon nanomaterials for lubricating oil additives
by: Kuiliang Gong, et al.
Published: (2020-07-01)

Microstructure Comparison for AlSn20Cu Antifriction Alloys Prepared by Semi-Continuous Casting, Semi-Solid Die Casting, and Spray Forming
by: Shuhui Huang, et al.
Published: (2022-09-01)

Production of silumins with highly dispersed inverted microstructure
by: E. I. Marukovich, et al.
Published: (2020-10-01)

Resource testing of modified plain bearings for the aviation industry
by: M. Khimko, et al.
Published: (2024-06-01)

CALCULATED ASSESSMENT OF CONTACT STRENGTH, WEAR AND RESOURCE OF METAL‐POLYMER GEARS MADE OF DISPERSION‐ REINFORCED COMPOSITES
by: Myron Chernets, et al.
Published: (2021-06-01)

Development and implementation of bimetallic sliding bearings made of aluminum alloys
by: A. E. Mironov, et al.
Published: (2016-10-01)

DEVELOPMENT OF A MATHEMATICAL MODEL FOR ANALYZING THE ECONOMIC EFFECT OF THE MODIFIED DESIGN OF A RADIAL SLIDING BEARING AND ITS PREDICTION
by: Anna V. Morozova, et al.
Published: (2023-09-01)

MANUFACTURE AND USE OF SILUMIN WITH GLOBULAR SILICON
by: E. I. Marukovich, et al.
Published: (2017-07-01)