Investigation on the wear of spur gears generated by modified cutter

Abstract Tooth surface wear damage is one of the main causes of gearing system failure. Excessive wear leads to tooth profile loss and an increase in transmission errors, as the worn gear surfaces are no longer conjugate. Thus, the enhancement of gear durability against wear is important for gear ap...

Full description

Bibliographic Details
Published in:	Friction
Main Authors:	Fangyan Zheng, Jun Zhang, Ligang Yao, Rulong Tan
Format:	Article
Language:	English
Published:	Tsinghua University Press 2020-07-01
Subjects:	gear wear cutter modification gear modification
Online Access:	https://doi.org/10.1007/s40544-019-0337-8

Similar Items

Profile Analysis of Spur Gear Shaping Cutters Based on Sharpened Cutting Edges
by: Chin-Lung Huang, et al.
Published: (2022-06-01)

Computerized Generation of Nonstandard and Asymmetric Involute Spur Gears Based on Rack Cutter Parametric Tracing
by: Ahmed A. Toman, et al.
Published: (2025-02-01)

Analysis of Wear Process in Aeronautic Spur Gear
by: Chen Haifeng, et al.
Published: (2018-01-01)

Influence of Non-uniform Wear on Modal Characteristics of Spur Gears
by: Kaiwen Lu, et al.
Published: (2022-07-01)

MODELING OF RUNNING CUTTERS FOR SHAPING OF IMPROVED NONINVOLUTE TOOTH GEARS
by: Tatyana TRETYAK, et al.
Published: (2012-05-01)

Tooth Contact Analysis of Straight Bevel Gears Machined with Concave Cutters
by: Wang Zhiyong, et al.
Published: (2024-02-01)

Mathematical Modeling of Full Tooth Surface of Spiral Bevel Gear based on the Digital Closed Loop Manufacturing
by: Huang Denghong
Published: (2017-01-01)

Research on the Influence of Composite Modification Design on Tooth Surface Wear of Transmission Gears
by: Bai Xiaoning, et al.
Published: (2023-08-01)

Numerical Simulation of the Influence of Gear Modification on the Meshing Stiffness
by: Wang Zhiqin, et al.
Published: (2020-04-01)

Study on the Spiral Bevel Gear NC Machining Technology based on Double-spindle Cutter Head Machine
by: Xu Zengjun, et al.
Published: (2017-01-01)

Analysis of the Effect of the Addendum Modification Coefficient for Contact Surfaces of Spur Gear
by: Bodzás Sándor
Published: (2019-05-01)

Study on design of taper shaped skiving cutters for internal gears (Taper shaped cutter ground with trapezoidal wheels used for pinion cutter grinding)
by: Koichiro URIU, et al.
Published: (2017-08-01)

EQUIDISTANT TOOTH GENERATION ON NONCYLINDRICAL SURFACES FOR TWO-PARAMETER GEARING
by: Yuriy GUTSALENKO,, et al.
Published: (2011-11-01)

Gear Whine Optimization Design of Diesel Engine Timing Gear System
by: Zeng Xiaochun, et al.
Published: (2022-11-01)

Tooth surface mismatch design of cycloidal bevel gear based on two directions modification of pinion cutter
by: Shaowu NIE, et al.
Published: (2024-03-01)

A New Modification Method with Double Spline Curve for the Tooth Surface Design of Spur Gear
by: Wenjun Fan, et al.
Published: (2021-02-01)

Calculation and Analysis of Spur Gear Mesh Stiffness with Considering Wear
by: Yang Liu, et al.
Published: (2021-01-01)

Investigation of rack cutter geometry and trochoid curves at transverse section in gear manufacturing simulation
by: Mahmut Cüneyt FETVACI, et al.
Published: (2024-12-01)

Experimental Study on Bending Stress of Spur Gear with Tooth Profile Modification and Finite Element Verification
by: Chen Xueshi, et al.
Published: (2018-01-01)

Analysis of Modification and Dynamic Characteristic of Timing Gear of Diesel
by: Jinlin Bai, et al.
Published: (2019-09-01)

Experimental Study of Linear Profile Modification in Spur Gear Leg
by: Agus Sigit Pramono, et al.
Published: (2024-05-01)

Mathematical Modeling and Machining of the Internal Double-Arc Spiral Bevel Gear by Finger Milling Cutters for the Nutation Drive Mechanism
by: Dawei Zhang, et al.
Published: (2022-08-01)

Contrast Experimental Study on the Dynamic Characteristic of Modification Gear
by: Yan Tianxiao, et al.
Published: (2016-01-01)

Research of Chamfering Tooth Crest of Spiral Bevel Gear based on Disc Cutter
by: Wei Wei, et al.
Published: (2018-01-01)

Experimental Investigations to Study the Effectiveness of Cepstral Features to Detect Surface Fatigue Wear Development in a FZG Spur Geared System Subjected to Accelerated Tests
by: Muniyappa AMARNATH, et al.
Published: (2021-02-01)

Contrast Experimental Study on the Bending Fatigue Life of Modification Gear
by: Yan Tianxiao, et al.
Published: (2016-01-01)

Transient Thermo Elastohydrodynamic Lubrication of Asymmetric Polymer Planetary Gear with Addendum Modification
by: Mingyu Zuo, et al.
Published: (2022-05-01)

Research of the Method of Chamfering Tooth Crest for Spiral Bevel Gear Using Spherical Cutter
by: Wei Wei, et al.
Published: (2017-01-01)

The Calculation of EHL of Diagonal Modified Narrow Helical Gears and Film Thickness Measurement
by: Li Xianwen. et al.
Published: (1995-01-01)

Nonlinear Dynamic Analysis of a Spur Gear Pair System with Wear Considering the Meshing Position
by: Zhibo Geng, et al.
Published: (2024-01-01)

OPTIMIZATION OF GEAR-MESH SINGLE-STAGE GEARBOX FOR REGIONAL TRAINS BY FEM
by: Karel PETR, et al.
Published: (2014-09-01)

Multi-condition and Multi-objective Modification Optimization Design of Spur Gear
by: Rui Shen, et al.
Published: (2021-02-01)

Research on Loaded Transmission Error of Internal Short Tooth Spur Gears
by: Yin Xunmin, et al.
Published: (2023-06-01)

Wear of TiAlCN Coating on HCR Gear
by: Pavol Švec, et al.
Published: (2022-12-01)

Exact Solution of Mesh Stiffness and Analysis of Tooth Profile Parameters for Asymmetric Gear Pairs
by: Yang Yong, et al.
Published: (2024-03-01)

Theoretical Investigation of Mesh Relationship and Mesh Stiffness of Internal Spur Gears with Tooth Wear
by: Yanan Wang, et al.
Published: (2023-02-01)

Gear Cutting Machining of Klingelnberg Cyclo-palloid Bevel Gear based on Monolithic Cutter Disc
by: Wang Zhiyong, et al.
Published: (2018-01-01)

Influence of the Correction of Cycloid Tooth Bevel Gear Cutter Head Radius on the Tooth Surface Contact Performance
by: Han Zhengyang, et al.
Published: (2017-01-01)

ACCURACY RESEARCH OF THE DIAMETRICAL SIZES FORMING AT GEAR SHAPING BY STEPPED CUTTER
by: N. M. Rasulov, et al.
Published: (2015-09-01)

Research on Tooth Surface Design of Curved Tooth Face Gear based on Cylindrical Gear Addendum Modified
by: Yong Chen, et al.
Published: (2021-05-01)