Determination of bond strength between the hard-faced (HF) layer and the base material (BM) of forging dies
This paper points out complex working conditions of forging dies, which are the most frequent causes of their damage, and proposes suitable hard-facing repair procedures. The shear strength between the hard-faced layer and base metal has been measured using specially developed tool, and correlation...
| Published in: | Metalurgija |
|---|---|
| Main Authors: | V. Lazić, A. Sedmak, I. Samardžić, S. Aleksandrović, D. Milosavljević, D. Arsić, M. Đorđević |
| Format: | Article |
| Language: | English |
| Published: |
Croatian Society for Materials Protection
2015-10-01
|
| Subjects: | |
| Online Access: | http://hrcak.srce.hr/file/209301 |
Similar Items
Selection of the optimal hard facing (HF) technology of damaged forging dies based on cooling time t<sub>8/5</sub>
by: D. Arsić, et al.
Published: (2016-01-01)
by: D. Arsić, et al.
Published: (2016-01-01)
Tribological Investigations of Hard-Faced Layers and Base Materials of Forging Dies with Different Kinds of Lubricants Applied
by: V. Lazić, et al.
Published: (2010-12-01)
by: V. Lazić, et al.
Published: (2010-12-01)
Hardness and Conductivity of Die Forged ZYK530 Magnesium Alloy
by: Fenghong CAO, et al.
Published: (2022-08-01)
by: Fenghong CAO, et al.
Published: (2022-08-01)
Energy-Saving Hot Open Die Forging Process of Heavy Steel Forgings on an Industrial Hydraulic Forging Press
by: Ryszard Dindorf, et al.
Published: (2020-04-01)
by: Ryszard Dindorf, et al.
Published: (2020-04-01)
Investigation of the influence of hybrid layers on the life time of hot forging dies
by: S. Legutko, et al.
Published: (2013-04-01)
by: S. Legutko, et al.
Published: (2013-04-01)
Enhancement of microstructure homogeneity and hardness after heat treatment of forged flex splines with CNN-based preform design
by: Joonhee Park, et al.
Published: (2025-09-01)
by: Joonhee Park, et al.
Published: (2025-09-01)
Ewaluation and analysis of the large-size forged and rolled en AW – 7057 alumminum alloy ring structure
by: J. Lulkiewicz, et al.
Published: (2024-01-01)
by: J. Lulkiewicz, et al.
Published: (2024-01-01)
Numerical Simulation Study and Process Optimization of Closed-die Forging for Coupler Knuckle
by: LI Li, et al.
Published: (2025-02-01)
by: LI Li, et al.
Published: (2025-02-01)
Regulating of wear properties through microstructure engineering in novel cost-effective Fe30Ni25Cr25Mo10Al10 high-entropy alloy processed by cyclic closed-die forging
by: Majid Naseri, et al.
Published: (2024-09-01)
by: Majid Naseri, et al.
Published: (2024-09-01)
Miniaturised experimental simulation of open-die forging
by: David Connolly, et al.
Published: (2023-09-01)
by: David Connolly, et al.
Published: (2023-09-01)
Effect of Liquid Forging Pressure on Solubility and Freezing Coefficients of Cast Aluminum 2124, 2218 and 6063 Alloys
by: Vineet Tirth, et al.
Published: (2020-03-01)
by: Vineet Tirth, et al.
Published: (2020-03-01)
Effect of holding time on improving the microstructure and mechanical properties of die-forged AZ80-Ce magnesium alloys
by: Tianyi Ni, et al.
Published: (2024-11-01)
by: Tianyi Ni, et al.
Published: (2024-11-01)
Increasing the efficiency of forging tools by thermal diffusion boronizing
by: Željko Stojanović, et al.
Published: (2017-03-01)
by: Željko Stojanović, et al.
Published: (2017-03-01)
Upper Bound Analysis of Closed-Die Forging of Eccentrically-Located SiCp AMC Preforms
by: Manish Agarwal, et al.
Published: (2021-11-01)
by: Manish Agarwal, et al.
Published: (2021-11-01)
BOUNDARY ELEMENT DETERMINATION OF STRAIN UNIFORM DISTRIBUTION CONDITIONS IN FORGINGS PRODUCED UNDER BROACHING BY RADIAL ROLLING-IMPRESSION DIES
by: Armenak V. Vovchenko
Published: (2012-08-01)
by: Armenak V. Vovchenko
Published: (2012-08-01)
BOUNDARY ELEMENT DETERMINATION OF STRAIN UNIFORM DISTRIBUTION CONDITIONS IN FORGINGS PRODUCED UNDER BROACHING BY RADIAL ROLLING-IMPRESSION DIES
by: Armenak V. Vovchenko
Published: (2018-07-01)
by: Armenak V. Vovchenko
Published: (2018-07-01)
Improving durability of hot forging tools by applying hybrid layers
by: Z. Gronostajski, et al.
Published: (2015-10-01)
by: Z. Gronostajski, et al.
Published: (2015-10-01)
The Simulation and Analysis of the Closed Die Hot Forging Process by A Computer Simulation Method
by: Dipakkumar Gohil
Published: (2012-06-01)
by: Dipakkumar Gohil
Published: (2012-06-01)
Technical Intelligence Approach: Determining Patent Trends in Open Die Forging
by: Marisela Rodriguez, et al.
Published: (2014-06-01)
by: Marisela Rodriguez, et al.
Published: (2014-06-01)
Improvement of Metal Forging Processes by Stresses and Temperatures Analysis
by: Adnan Mohammeda, et al.
Published: (2022-06-01)
by: Adnan Mohammeda, et al.
Published: (2022-06-01)
Selected Aspects of Lubrication in Die Forging Processes at Elevated Temperatures—A Review
by: Marek Hawryluk, et al.
Published: (2023-05-01)
by: Marek Hawryluk, et al.
Published: (2023-05-01)
Manufacturing of die blanks from hard alloy granulated mixture and influence of chemical composition of the mixture on technological properties of hard alloy die blanks
by: O. Yu. Khodosovskaya, et al.
Published: (2024-06-01)
by: O. Yu. Khodosovskaya, et al.
Published: (2024-06-01)
Design, Characterisation and Numerical Investigations of Additively Manufactured H10 Hybrid-Forging Dies with Conformal Cooling Channels
by: Bernd-Arno Behrens, et al.
Published: (2022-06-01)
by: Bernd-Arno Behrens, et al.
Published: (2022-06-01)
Analysis of the Industrial Process of Producing a Lever-Type Forging Used in Motorcycles
by: M. Hawryluk, et al.
Published: (2019-12-01)
by: M. Hawryluk, et al.
Published: (2019-12-01)
A Study on Hot Open Die Forging Method of Blade Cylinder Root Using AA 5083 Cast Alloy
by: Yong Chul Kwon, et al.
Published: (2019-06-01)
by: Yong Chul Kwon, et al.
Published: (2019-06-01)
ASSESSMENT OF WEAR AND CORROSION RESISTANCE IN TiC AND WC COATINGS APPLIED TO AISI 1040 FORGED STEEL VIA ELECTROSPARK DEPOSITION
by: D. R. P. Rajarathnam, et al.
Published: (2025-02-01)
by: D. R. P. Rajarathnam, et al.
Published: (2025-02-01)
The Effect of Heat Treatment of Forgings Directly from the Forging Temperature on their Properties
by: Z. Gronostajski, et al.
Published: (2020-05-01)
by: Z. Gronostajski, et al.
Published: (2020-05-01)
Analysis of the Industrial Process of Producing a Hub Forging Used in Motorcar Power Transmission Systems—A Case Study
by: Marek Hawryluk, et al.
Published: (2021-04-01)
by: Marek Hawryluk, et al.
Published: (2021-04-01)
Theoretical and Experimental Analysis of Mg/Al Bimetallic Handle Forging Process
by: P. Szota, et al.
Published: (2019-12-01)
by: P. Szota, et al.
Published: (2019-12-01)
Influence of die-forging deformation on microstructure of 1538MV non-quenched and tempered steel for crankshaft
by: YANG Yong, et al.
Published: (2018-05-01)
by: YANG Yong, et al.
Published: (2018-05-01)
Effect of multiple forging on the microstructure and properties of an as-cast Cu–Ni–Si alloy with high Ni and Si contents
by: Jinlong Zhang, et al.
Published: (2021-01-01)
by: Jinlong Zhang, et al.
Published: (2021-01-01)
Precision Design Method of Tooth Cavity of Chain Wheel Flashless Die Forging
by: Longjie Dai, et al.
Published: (2022-04-01)
by: Longjie Dai, et al.
Published: (2022-04-01)
Studies of the quality and cost-effectiveness of a novel conceptof open-die forged powerplant main shaft
by: P. Skubisz, et al.
Published: (2015-04-01)
by: P. Skubisz, et al.
Published: (2015-04-01)
Open die forging process simulation: a simplified industrial approach based on artificial neural network
by: Andrea Di Schino
Published: (2021-09-01)
by: Andrea Di Schino
Published: (2021-09-01)
THE EFFECT OF HARD FACING PROCESS ON THE HARDNESS AND MICROSTRUCTURE OF BUCKET TOOTH FOR DIFFERENT MANGANESE CONTENT
by: Suryo Darmo, et al.
Published: (2023-12-01)
by: Suryo Darmo, et al.
Published: (2023-12-01)
THE EFFECT OF HARD FACING PROCESS ON THE HARDNESS AND MICROSTRUCTURE OF BUCKET TOOTH FOR DIFFERENT MANGANESE CONTENT
by: Suryo Darmo, et al.
Published: (2022-12-01)
by: Suryo Darmo, et al.
Published: (2022-12-01)
OPTIMIZATION OF TEMPERATURE HARDENING FOR IMPROVING THE HEAT RESISTANCE OF TOOL STEEL 4X5MФ1С IN VARIOUS WORKPIECES Part 1. INFLUENCE OF HEATING TEMPERATURE 1040 °С IN THE OIL HARDENING AND HARDERING ON THE HARDNESS AND STRUCTURE OF FORGINGS AND CASTINGS MADE OF STEEL 4X5MФ1C
by: V. N. Fedulov
Published: (2017-07-01)
by: V. N. Fedulov
Published: (2017-07-01)
Microstructure and hardness evolution for LB/M microstructures in a hot working die steel
by: Zhizhong Yuan, et al.
Published: (2025-12-01)
by: Zhizhong Yuan, et al.
Published: (2025-12-01)
Effect of Forge Application on Microstructural and Mechanical Properties of AISI 316 Using Direct Drive Friction Welding Process
by: A. Jabbar Hassan, et al.
Published: (2022-08-01)
by: A. Jabbar Hassan, et al.
Published: (2022-08-01)
Achieving three-layered Al/Mg/Al sheet via combining porthole die co-extrusion and hot forging
by: Jianwei Tang, et al.
Published: (2020-09-01)
by: Jianwei Tang, et al.
Published: (2020-09-01)
Similar Items
-
Selection of the optimal hard facing (HF) technology of damaged forging dies based on cooling time t<sub>8/5</sub>
by: D. Arsić, et al.
Published: (2016-01-01) -
Tribological Investigations of Hard-Faced Layers and Base Materials of Forging Dies with Different Kinds of Lubricants Applied
by: V. Lazić, et al.
Published: (2010-12-01) -
Hardness and Conductivity of Die Forged ZYK530 Magnesium Alloy
by: Fenghong CAO, et al.
Published: (2022-08-01) -
Energy-Saving Hot Open Die Forging Process of Heavy Steel Forgings on an Industrial Hydraulic Forging Press
by: Ryszard Dindorf, et al.
Published: (2020-04-01) -
Investigation of the influence of hybrid layers on the life time of hot forging dies
by: S. Legutko, et al.
Published: (2013-04-01)
