Studying as - cast microstructure of the cold core (CC) ingot

In this study, the mechanism of the formation in structure of Cold Core ingot which is prepared by cold core casting method in lab is studied. The structure of the CC ingot is obtained by optical microscopy and macroscopic examination. And finite element simulation result is used to illustrate the h...

وصف كامل

التفاصيل البيبلوغرافية
الحاوية / القاعدة:	Metalurgija
المؤلفون الرئيسيون:	X. J. Zhang, C. J. Xu, Z. Y. Wang, J. Li, L. W. Zhang, X. D. Peng
التنسيق:	مقال
اللغة:	الإنجليزية
منشور في:	Croatian Society for Materials Protection 2017-01-01
الموضوعات:	Casting Cold core ingot Heat transfer Macrostructure Microstructure
الوصول للمادة أونلاين:	http://hrcak.srce.hr/file/249270

مواد مشابهة

Application of Powder without Free Carbon for Ingot Casting Cold Heading Steel
حسب: Zhu Zumin, وآخرون
منشور في: (2008-01-01)

Experimental casting of forging ingots from model material
حسب: Moravec Ján, وآخرون
منشور في: (2018-01-01)

Investigation of the Hydrostatic Pressure Effect on the Formation of Hot Tearing in the AA6111 Alloy During Direct Chill Casting of Rectangular Ingots
حسب: Hamid Khalilpoor, وآخرون
منشور في: (2025-07-01)

A Cast-Mould from the Anuyshkar Hillfort (on the question of the metal ingot denomination system)
حسب: Natalya B. Krylasova
منشور في: (2023-10-01)

Microscopic investigations of axial zones of continuous casting ingots
حسب: K. Janiszewski
منشور في: (2015-07-01)

Research on automatic grinding platform for rare earth ingot casting
حسب: X. Zhen, وآخرون
منشور في: (2024-01-01)

The Casting Rate Impact on the Microstructure in Al–Mg–Si Alloy with Silicon Excess and Small Zr, Sc Additives
حسب: Evgenii Aryshenskii, وآخرون
منشور في: (2021-12-01)

Research on the structure evolution of ingots under electromagnetic feeding – cold core compositing casting
حسب: Yan Zhang, وآخرون
منشور في: (2025-12-01)

Math Simulation on Casting and Solidifying Process of 1.9 t Slab Ingot of Cold Working Die Steel D2 and Internal Defect Prediction
حسب: Li Ying, وآخرون
منشور في: (2011-10-01)

Influence of Hot Top Height on Macrosegregation and Material Yield in a Large-Size Cast Steel Ingot Using Modeling and Experimental Validation
حسب: Neda Ghodrati, وآخرون
منشور في: (2022-11-01)

Melting and casting of ingots made of an Mg - Li type alloys
حسب: T. Mikuszewski
منشور في: (2014-10-01)

Simulation study on temperature field and microstructure of Ti-6Al-4V alloy round ingot during EBCHM
حسب: Bing-Bing Peng, وآخرون
منشور في: (2021-01-01)

The Influence of Insertion Depth of Inorganic Materials on Solidification Microstructure and Segregation of 2.5-ton 42CrMo Ingot
حسب: Shujian Sun, وآخرون
منشور في: (2024-06-01)

Verification of Shrinkage Formation in Steel Ingots in Laboratory Conditions
حسب: Jan Moravec, وآخرون
منشور في: (2017-04-01)

CONTROL OF CHEMICAL COMPOSITION OF CASTING BRASS IN INGOTS USED FOR MANUFACTURE OF STOP VALVES
حسب: A. A. Pivovarchyk, وآخرون
منشور في: (2017-10-01)

Development of Rolled Steel Products from 3 t Ingot of Grade 8620 for Railway Axle Box Bearings
حسب: Li Bopeng, وآخرون
منشور في: (2024-05-01)

Development of Rolled Steel Products from 3 t Ingot of Grade 8620 for Railway Axle Box Bearings
حسب: Li Bopeng , Tao Shijun, Zhang Jianfeng, Liu Yueyun, Lu Zhujun, Lv Wenjun
منشور في: (2024-05-01)

Influence of the Hot-Top Thermal Regime on the Severity and Extent of Macrosegregation in Large-Size Steel Ingots
حسب: Neda Ghodrati, وآخرون
منشور في: (2024-04-01)

Microstructure and characterization of electromagnetic casting Al 2024 alloy ingots
حسب: A. Patarić, وآخرون
منشور في: (2008-10-01)

Modeling the Evolution of Casting Defect Closure in Ingots through Radial Shear Rolling Processing
حسب: Alexandr Arbuz, وآخرون
منشور في: (2023-12-01)

Simulation study on effect of chassis water cooling on solidification of eleven tons flat steel ingot
حسب: Z. S. Zhang, وآخرون
منشور في: (2020-01-01)

Prediction model of interfacial heat transfer coefficient changing with time and ingot diameter
حسب: Li Yihong, وآخرون
منشور في: (2022-05-01)

Studying structure and properties of shaped ingots obtained in various conditions of crystallization
حسب: Sv. S. Kvon, وآخرون
منشور في: (2018-01-01)

Influence the Composition of the Core Mixture to the Occurrence of Veinings on Castings of Cores Produced by Cold-Box-Amine Technology
حسب: P. Delimanová, وآخرون
منشور في: (2023-09-01)

Influence of ecologically friendly cores on surface quality of castings based on magnesium alloys
حسب: P. Lichý, وآخرون
منشور في: (2014-07-01)

Structural Zones in Large Static Ingot. Forecasts for Continuously Cast Brass Ingot
حسب: Wołczyński W., وآخرون
منشور في: (2016-09-01)

Microstructure and Homogenization Process of Large Ingot of As-cast Condition C650R Nickel-based Alloy
حسب: Kou Jinfeng, وآخرون
منشور في: (2025-07-01)

Microstructure and Homogenization Process of Large Ingot of As-cast Condition C650R Nickel-based Alloy
حسب: Kou　Jinfeng, Bai　Yaguan, Nie　Yihong, Zhang　Xin, Zhang　Bingbing, Li　Jinshan, He　Yixuan
منشور في: (2025-08-01)

Magnesium Ingot Stacking Segmentation Algorithm for Industrial Robot Based on the Correction of Image Overexposure Area
حسب: Qiguang Li, وآخرون
منشور في: (2023-07-01)

Effects of a Novel Mechanical Vibration Technology on the Internal Stress Distribution and Macrostructure of Continuously Cast Billets
حسب: Shuai Liu, وآخرون
منشور في: (2025-07-01)

Performance evaluation of metal mould for casting aluminium alloy (AA6063) of scientific products in National agency for science and engineering infrastructure
حسب: Sh. Abdullahi Mohammed, وآخرون
منشور في: (2023-03-01)

The simulation study on central porosity of 450 mm diameter steel electrode ingot
حسب: Z. S. Zhang, وآخرون
منشور في: (2017-01-01)

Magnetic field distribution in the electromagnetic feeding riser of rectangle steel ingot
حسب: C. J. Xu, وآخرون
منشور في: (2016-10-01)

Porosity forming mechanism and numerical simulation of casting process optimization of nickel-based heat-resistant alloy electrode ingot with large height to diameter ratio
حسب: Kun Chen, وآخرون
منشور في: (2024-03-01)

Simulation study on influence of exothermic riser on ingot solidification
حسب: K. F. Ji, وآخرون
منشور في: (2019-01-01)

Macro-/Microstructural Features and Temperature Distribution of Pure Aluminum 1070 in Novel Thin Slab Continuous Casting Process
حسب: Qijia Mao, وآخرون
منشور في: (2025-01-01)

Application of Modified Cores for Grain Refinement in Castings of Aircraft Turbine Blades
حسب: Binczyk F., وآخرون
منشور في: (2017-09-01)

Study on the influence of new riser structure on the quality of steel ingot
حسب: M. G. Shen, وآخرون
منشور في: (2019-01-01)

Influence of the speed of downward semi-continuous casting on the crystal size and mechanical properties of recycled copper
حسب: M. Maleta, وآخرون
منشور في: (2023-01-01)

Influence of hot top geometry on columnar-to-equiaxed transition in a 12 MT steel ingot
حسب: Neda Ghodrati, وآخرون
منشور في: (2024-07-01)