Kinetics of Austenite Layer Growth on the Surface of Fe-23Cr-2.4Mo Ferritic Stainless Steel During Solution Nitriding

Kinetics of Austenite Layer Growth on the Surface of Fe-23Cr-2.4Mo Ferritic Stainless Steel During Solution Nitriding

Show other versions (1)

In this study, the kinetics of austenite layer growth on the surface of Fe-23Cr-2.4Mo ferritic stainless steel during solution nitriding and the effects of nitrogen adding on microstructure and hardness of the steel have been investigated. Steel plates of 2 mm thick were solution-nitrided at 1200˚C...

Full description

Bibliographic Details
Main Authors:	Kh. Farjam Hajiagha, A. R. Akbari, R. Mohammadzadeh
Format:	Article
Language:	fas
Published:	Isfahan University of Technology 2017-09-01
Series:	Journal of Advanced Materials in Engineering
Subjects:	solution nitriding phase transformation austenite layer thickness ferritic stainless steel microhardness.
Online Access:	http://jame.iut.ac.ir/article-1-464-en.html

Similar Items

Kinetics of Austenite Layer Growth on the Surface of Fe-23Cr-2.4Mo Ferritic Stainless Steel During Solution Nitriding
by: Kh. Farjam Hajiagha, et al.
Published: (2017-09-01)

HARDNESS OF NITRIDED LAYERS TREATED BY PLASMA NITRIDING
by: Zdeněk Joska, et al.
Published: (2020-06-01)

Friction Characteristics of Nitrided Layers on AISI 430 Ferritic Stainless Steel Obtained by Various Nitriding Processes
by: Hakan AYDIN, et al.
Published: (2013-03-01)

Influence of the Chemical Composition on the Behavior of Austenitic Stainless Steel in Fluid Layer Nitriding Process
by: Ovidiu DIMA
Published: (2008-05-01)

Behavior of Some Stainless Nitrided Austenite Steel Types to Corrosion and Abrasion
by: Ovidiu DIMA, et al.
Published: (2006-11-01)

Behavior of Welded Joints From Some Stainless Austenite Steel Types During Nitriding Process
by: Ovidiu DIMA
Published: (2006-11-01)

Influence of delta ferrite on corrosion susceptibility of AISI 304 austenitic stainless steel
by: Lawrence O. Osoba, et al.
Published: (2016-12-01)

Transformation of the δ-Ferrite in SS2343 Austenitic Stainless Steel upon Annealing at 1050 °C, 1150 °C and 1250 °C
by: Boštjan Arh, et al.
Published: (2021-06-01)

Application of Active-Screen Plasma Nitriding to an Austenitic Stainless Steel Small-Diameter Thin Pipe
by: Kenzo Sumiya, et al.
Published: (2021-02-01)

Corrosion behavior of new generation super-ferritic stainless steels
by: Andrea Di Schino
Published: (2019-07-01)

Effect of the Temperature in the Mechanical Properties of Austenite, Ferrite and Sigma Phases of Duplex Stainless Steels Using Hardness, Microhardness and Nanoindentation Techniques
by: Gorka Argandoña, et al.
Published: (2017-06-01)

Phase Composition of Austenitic Stainless Steels in Additive Manufacturing: A Review
by: Sergey Astafurov, et al.
Published: (2021-06-01)

Orbital TIG welding of X5CrNi18-10 austenitic stainless steel
by: Jacek Górka, et al.
Published: (2018-05-01)

The influence of the heat treatment on delta ferrite transformation in austenitic stainless steel welds
by: B. Mateša, et al.
Published: (2012-04-01)

The Anisotropic Stress-Induced Diffusion and Trapping of Nitrogen in Austenitic Stainless Steel during Nitriding
by: Arvaidas Galdikas, et al.
Published: (2020-10-01)

Microstructures and Properties of a Low-Carbon-Chromium Ferritic Stainless Steel Treated by a Quenching and Partitioning Process
by: Gang Luo, et al.
Published: (2019-05-01)

Isothermal Austenite–Ferrite Phase Transformations and Microstructural Evolution during Annealing in Super Duplex Stainless Steels
by: Andrea Francesco Ciuffini, et al.
Published: (2017-09-01)

Behaviour at Nitriding in Fluidized Layer of Austenitic Stainless Steels at the Temperature of 450 °C
by: Ovidiu DIMA
Published: (2007-05-01)

Behaviour at Nitriding in Fluidized Layer of Austenitic Stainless Steels at the Temperature of 1050 °C
by: Ovidiu DIMA
Published: (2007-11-01)

Hydrogen-Induced Delayed Cracking in TRIP-Aided Lean-Alloyed Ferritic-Austenitic Stainless Steels
by: Suvi Papula, et al.
Published: (2017-06-01)

Effect of Temperature and Time on Decomposition of δ-ferrite in Austenitic Stainless Steel
by: Gigović-Gekić Almaida, et al.
Published: (2020-07-01)

Microstructure/Mechanical Characterization of Plasma Nitrided Fine-Grain Austenitic Stainless Steels in Low Temperature
by: Abdelrahman Farghali, et al.
Published: (2021-05-01)

Short-term low-temperature glow discharge nitriding of 316L austenitic steel
by: T. Frączek, et al.
Published: (2011-07-01)

Analysis of the initial deformabiliti of austenitic stainless stells with a bend test
by: B. Arh, et al.
Published: (2019-01-01)

Assessment of the effectiveness of 316L austenitic steel unconventional glow discharge nitriding
by: T. Frączek, et al.
Published: (2011-04-01)

Tensile properties of shielded metal arc welded dissimilar joints of nuclear grade ferritic steel and austenitic stainless steel
by: Karthick K., et al.
Published: (2016-12-01)

Stress Induced Nitrogen Diffusion in Nitrided Austenitic Stainless Steel
by: Teresa MOSKALIOVIENĖ, et al.
Published: (2011-03-01)

Surface Modification of Austenitic Stainless Steel by Means of Low Pressure Glow-Discharge Treatments with Nitrogen
by: Francesca Borgioli, et al.
Published: (2019-09-01)

From Austenitic Stainless Steel to Expanded Austenite-S Phase: Formation, Characteristics and Properties of an Elusive Metastable Phase
by: Francesca Borgioli
Published: (2020-01-01)

The roles of ferrite and titanium in the stabilization of 18Cr-8Ni cast stainless steels /
by: Watts, A. A.
Published: (1952)

The efficiency of ion nitriding of austenitic stainless steel 304 using the “active screen”
by: M. Ogórek, et al.
Published: (2015-01-01)

Characterization of a tie-line series of austenitic-ferritic stainless steels.
by: Moffatt, William Charles
Published: (2006)

INFLUENCE OF SURFACE NANO/ULTRAFINE STRUCTURE ACHIEVED BY DEEP ROLLING PROCESS ON PLASMA NITRIDING AND TRIBOLOGICAL PROPERTIES OF THE AISI 316L STAINLESS STEEL
by: A. Jafari Tadi, et al.
Published: (2017-09-01)

Impact fracture of austenitic stainless steels
by: Kornegay, Cynthia E.
Published: (2014)

Comparison of the corrosion resistance of DIN W. Nr. 1.4970 (15%Cr-15%Ni-1.2%Mo-Ti) and ASTM F-138 (17%Cr-13%Ni-2.5%Mo) austenitic stainless steels for biomedical applications
by: Maysa Terada, et al.
Published: (2006-09-01)

Cathodic cage nitriding of AISI 409 ferritic stainless steel with the addition of CH4
by: Rômulo Ribeiro Magalhães de Sousa, et al.
Published: (2012-04-01)

Austenitic Stainless Steels Corrosion Properties Modified by Silicon Alloying
by: Brânduşa GHIBAN, et al.
Published: (2007-05-01)

Anticorrosion Properties of the Low-Temperature Glow Plasma Nitriding Layer on AISI 904L Austenitic Stainless Steel in Hydrofluoric Acid Obtained at Various NH<sub>3</sub> Pressures
by: Wei Shi, et al.
Published: (2020-11-01)

Ion nitriding using active screen method
by: M. Ogorek, et al.
Published: (2019-01-01)

Flow and fracture of type 304 austenitic stainless steel bar and weldments /
by: Dalder, Edward N. C.
Published: (1973)