ON OPTIMIZATION OF STEELMAKING IN ELECTRIC ARC FURNACE AND ITS LADLE TREATMENT IN LADLE-FURNACE
Steelmaking in arc 150-ton electric furnace using iron-rich pellets is considered. It is shown that the melting results are determined by the conditions of the simultaneous processes of the pellet melting and the melt oxidation refining. At that, it is important to monitor both the level of the bath...
Main Authors: | Alexander Yuryevich Kem, Vladimir Olegovich Kazartsev, Eduard Edgarovich Merker, Denis Alexandrovich Kharlamov |
---|---|
Format: | Article |
Language: | Russian |
Published: |
Don State Technical University
2014-06-01
|
Series: | Advanced Engineering Research |
Subjects: | |
Online Access: | https://www.vestnik-donstu.ru/jour/article/view/311 |
Similar Items
-
The effect of argon stirring on separation of oxidic inclusions in the ladle furnace at Sandvik Materials Technology AB
by: Andersson, Erik
Published: (2015) -
Development of High Resistance Hot Mix Asphalt with Electric Arc Furnace Slag, Ladle Furnace Slag, and Cellulose Fibers from the Papermaking Industry
by: Juan María Terrones-Saeta, et al.
Published: (2021-01-01) -
Evaluation of flexural properties and characterisation of 10-mm thin geopolymer based on fly ash and ladle furnace slag
by: Ng Yong-Sing, et al.
Published: (2021-11-01) -
Formulation, mechanical properties and phase analysis of fly ash geopolymer with ladle furnace slag replacement
by: Ng Hui-Teng, et al.
Published: (2021-05-01) -
Use of Ladle Furnace Slag and Other Industrial By-Products to Encapsulate Chloride in Municipal Solid Waste Incineration Fly Ash
by: Ying Wang, et al.
Published: (2019-03-01)