Effect of the Particle Geometry and Adhesive Mass Percentage on the Physical and Mechanical Properties of Particleboard made from Peanut Hull
Peanut hull residues were considered for the manufacturing of particleboards. Various concentrations of two types of adhesive—polymeric diphenylmethane diisocyanate (MDI) and urea-formaldehyde (UF)—were separately combined with four types of peanut hull particles (fine, mixed, coarse particles, and...
Main Authors: | Xiyi Cheng, Xia He, Jie Xie, Peng Quan, Kang Xu, Xianjun Li, Zhiyong Cai |
---|---|
Format: | Article |
Language: | English |
Published: |
North Carolina State University
2016-07-01
|
Series: | BioResources |
Subjects: | |
Online Access: | http://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_11_3_7271_Cheng_Particle_Geometry_Adhesive_Mass_Percentage |
Similar Items
-
Effects of Polymer Impregnation on Properties of Bamboo
by: Wanchart PREECHATIWONG, et al.
Published: (2011-11-01) -
The manufacture of particleboard using tannin-modified urea
formaldehyde adhesive
by: ُSima Sepahvand, et al.
Published: (2013-06-01) -
Effect of Diisocyanates as Compatibilizer on the Properties of BF/PBAT Composites by In Situ Reactive Compatibilization, Crosslinking and Chain Extension
by: Xiwei Xie, et al.
Published: (2020-02-01) -
Making wheat straw particleboards by using mixture of MF and UF resins
by: Mohamad Tasoji, et al.
Published: (2010-09-01) -
EVALUATION OF RAPESEED STALK PARTICLEBOARD BONDED WITH LABORATORY-MADE UREA-FORMALDEHYDE RESIN
by: Jamaludin, MA, et al.
Published: (2015)