On the technological and dimensional considerations for generating parts by 3D-printed with light processing focus
The paper takes into account the specific process of generation and parameter setting of the 3D printing process DLP (Digital Light Processing) which have an influence on the characteristics of the planar surface of the parts. In the first part of the paper, the study is conducted to determine th...
| Main Author: | |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Naval Academy Press
2019-06-01
|
| Series: | Scientific Bulletin of Naval Academy |
| Subjects: | |
| Online Access: | https://www.anmb.ro/buletinstiintific/buletine/2019_Issue1/01_MES/84.pdf |
| Summary: | The paper takes into account the specific process of generation and parameter setting
of the 3D printing process DLP (Digital Light Processing) which have an influence on the
characteristics of the planar surface of the parts. In the first part of the paper, the study is conducted to
determine the parameters which can influence the process of implementation of flat surfaces
pieces with 3D DLP process printing. In this part, there is and a comparison with the method of
generating the marker method 3D printing FDM (Fused Deposit Modelling). It has chosen this
solution because on the one hand the cost of parts are medium, as well as generating principle is
relatively simple in terms of technological point of view, but as well as the accuracy and quality
of surface generation made with this printing are much better than that provided by the process of
asking for comparison is made. Analysis of the surface will be done so about using an optical
microscope with a magnification of 0-500 times, and by means of an electronic measure for
dimensional parts as well as for spatial areas of the deviations generated. In it also make
references to the methodology of generating flat surfaces and to influence the way their
generation characteristics of the parts generated by the 3D printing process type DLP. It should
be pointed out that from the perspective of the characteristics of the surfaces generated in
literature there are few references in this direction being those areas indicated in the area, as well
as acting, although the products have engineering applications. |
|---|---|
| ISSN: | 2392-8956 1454-864X |