Full Annular RUB in Mechanical Seals, Part I: Experimental Results

Full Annular RUB in Mechanical Seals, Part I: Experimental Results

Bibliographic Details
Main Authors:	Donald E. Bently, John J. Yu, Paul Goldman, Agnes Muszynska
Format:	Article
Language:	English
Published:	Hindawi Limited 2002-01-01
Series:	International Journal of Rotating Machinery
Online Access:	http://dx.doi.org/10.1155/S1023621X02000301

Similar Items

Full Annular RUB in Mechanical Seals, Part I: Experimental Results
by: Bently Donald E., et al.
Published: (2002-01-01)

Full Annular RUB in Mechanical Seals, Part II: Analytical Study
by: Donald E. Bently, et al.
Published: (2002-01-01)

Full Annular RUB in Mechanical Seals, Part II: Analytical Study
by: Bently Donald E., et al.
Published: (2002-01-01)

Thermal Bending of the Rotor Due to Rotor-to-Stator Rub
by: Paul Goldman, et al.
Published: (2000-01-01)

Dynamics of full annular rotor rub.
by: Stackley, Sean Joseph.
Published: (2012)

Dynamics of full annular rotor rub
by: Stackley, Sean Joseph
Published: (2005)

The Influence of the Axial Rub Added in the Radial Rub on the Wear of the Seal Fins during the High Speed Rub of Labyrinth-Honeycomb Seal
by: Bin Lu, et al.
Published: (2021-04-01)

Tip Rub Induced Blade Vibrations: Experimental and Computational Results
by: Garza, Jared W.
Published: (2006)

Detecting seal-to-rotor rubs within steam turbines : the suitability of acoustic emission monitoring
by: Leahy, Mark John
Published: (2006)

Dynamic Response of Rub Caused by a Shedding Annular Component Happening in a Steam Turbine
by: J. M. Chen, et al.
Published: (2015-01-01)

Dynamics of Anisotropically Supported Rotors
by: Agnes Muszynska, et al.
Published: (1997-01-01)

Experimental and theoretical rotordynamic coefficients and leakage of straight smooth annular gas seals
by: Kerr, Bradley Gray
Published: (2005)

Vibrations in Leaking Spherical Valves with Annular Seal
by: Hesham Awad, et al.
Published: (2018-11-01)

An Annular Mechanical Temperature Compensation Structure for Gas-Sealed Capacitive Pressure Sensor
by: Kohei Higuchi, et al.
Published: (2012-06-01)

The Wear of Seal Fins during High-Speed Rub between Labyrinth Seal Fins and Honeycomb Stators at Different Incursion Rates
by: Bin Lu, et al.
Published: (2021-02-01)

Comparison of the Leakage Characteristics of the Straight Annular and Convergent Seals
by: Ustun, Serafettin
Published: (2012)

Experimental evaluation of rotor motion with radial rub
by: Joglekar, Nitindra R
Published: (2005)

Experimental measurement and analysis of wall pressure distribution for a 50% eccentric whirling annular seal
by: Suryanarayanan, Arun
Published: (2004)

Measured Results for a New Hole-Pattern Annular Gas Seal Incorporating Larger Diameter Holes, Comparisons to Results for a Traditional Hole-Pattern Seal and Predictions
by: Vannarsdall, Michael Lloyd
Published: (2012)

Analysis of Heat Flux Distribution during Brush Seal Rubbing Using CFD with Porous Media Approach
by: Manuel Hildebrandt, et al.
Published: (2021-03-01)

High-Pressure Annular Seal Leakage and Rotordynamics with Application to Turbomachinery
by: Gowda D. Rame, et al.
Published: (2002-01-01)

High-Pressure Annular Seal Leakage and Rotordynamics with Application to Turbomachinery
by: D. Rame Gowda, et al.
Published: (2002-01-01)

Rotordynamic Analysis of Textured Annular Seals With Multiphase (Bubbly) Flow
by: Gérard PINEAU, et al.
Published: (2011-09-01)

Orbit Decomposition Method for Rotordynamic Coefficients Identification of Annular Seals
by: Mingjie Zhang, et al.
Published: (2021-05-01)

Experimental measurement of phase averaged wall-pressure distributions for a 25% eccentric whirling annular seal
by: Cusano, Domenic
Published: (2006)

Study of Rubbing Alignment Technology and Liquid Crystal Rubbing Cloths
by: Eric, et al.
Published: (2010)

Experimental investigation of an actively controlled mechanical seal
by: Wolff, Paul
Published: (2007)

Investigation of rubbing parameter in liquid crystal molecular alignment by rubbed polyimide
by: Wei-Ming Kuo, et al.
Published: (2001)

Surface Patterning and Rotordynamic Response of Annular Pressure Seals Used in Turbomachinery
by: Jin, Hanxiang
Published: (2020)

Dynamic characteristics and leakage performance of liquid annular seals in centrifugal pumps
by: Storteig, Eskild
Published: (2000)

Hydrodynamic self-excited vibrations in leaking spherical valves with annular seal
by: Hesham Awad, et al.
Published: (2020-06-01)

Annular and annular-like products /
by: Hunt, Donald A.
Published: (1996)

Assessment of the mechanical forces applied during eye rubbing
by: Farhad Hafezi, et al.
Published: (2020-07-01)

Scent marking by male caribou: an experimental test of rubbing behavior
by: Craig A. Adams, et al.
Published: (2001-03-01)

The Dynamics of Rotor with Rubbing
by: Jerzy T. Sawicki, et al.
Published: (1999-01-01)

Research on local rub fault transfer mechanism in rotor system
by: Zhong Wang, et al.
Published: (2017-06-01)

The Calligraphy of the Rubbing of General Pei
by: CHANG,MIN-CHAO, et al.
Published: (2017)

Thermomechanical Behavior of Rotor with Rubbing
by: Sawicki T. J., et al.
Published: (2003-01-01)

Thermomechanical Behavior of Rotor with Rubbing
by: Jerzy T. Sawicki, et al.
Published: (2003-01-01)

Hydrogen in rubbing lubricated contacts
by: Newlands, Christopher Ian
Published: (2004)