Torsion Property of the Structure Bonded Aluminum Foam Due to Impact

• Main Authors: Hwang G.W., Cho J.U.
• Format: Article
• Language: English
• Published: Polish Academy of Sciences 2017-06-01
• Series: Archives of Metallurgy and Materials
• Subjects: Aluminum foam; Bonding stress; Fracture energy; Adhesively bonded structure
• Online Access: http://www.degruyter.com/view/j/amm.2017.62.issue-2/amm-2017-0207/amm-2017-0207.xml?format=INT

An aluminum foam added with foaming agent, is classified into an open-cell type for heat transfer and a closed-cell type for shock absorption. This study investigates the characteristic on the torsion of aluminum foam for a closed-cell type under impact. The fracture characteristics are investigated through the composite of five types of aluminum foam (the thicknesses of 25, 35, 45, 55 and 65 mm), when applying the torsional moment of impact energy on the junction of a porous structure attached by an adhesive. When applying the impact energy of 100, 200 and 300J, the aluminum foams with thicknesses of 25 mm and 35 mm broke off under all conditions. For the energy over 200J, aluminums thicker than 55 mm continued to be attached. Furthermore, the aluminum specimens with thicknesses of 55 mm and 65 mm that were attached with more than 30% of bonding interface remained, proving that they could maintain bonding interface against impact energy. By comparing the data based on the analysis and test result, an increase in the thickness of specimen leads to the plastic deformation as the stress at the top and bottom of bonding interface moves to the middle by spreading the stress horizontally. Based on this fracture characteristic, this study can provide the data on the destruction and separation of bonding interface and may contribute to the safety design.