Ultra-High Early Strength Cementitious Grout Suitable for Additive Manufacturing Applications Fabricated by Using Graphene Oxide and Viscosity Modifying Agents
One of the considerable challenges in the design of cementitious mixtures for additive manufacturing/three-dimensional (3D) printing applications is achieving both suitable fresh properties and significant mechanical strengths. This paper presents the use of graphene oxide (GO) as a promising nano r...
Main Authors: | Alyaa Mohammed, Nihad Tareq Khshain Al-Saadi |
---|---|
Format: | Article |
Language: | English |
Published: |
MDPI AG
2020-12-01
|
Series: | Polymers |
Subjects: | |
Online Access: | https://www.mdpi.com/2073-4360/12/12/2900 |
Similar Items
-
Estimation of Viscosity and Yield Stress of Cement Grouts at True Ground Temperatures Based on the Flow Spread Test
by: Zhipeng Xu, et al.
Published: (2020-06-01) -
Optimization of cement-based grouts using chemical additives
by: Mohammad Reza Azadi, et al.
Published: (2017-08-01) -
MODERN TECHNOLOGIES OF CEMENT GROUTING
by: Kharchenko Igor Yakovlevich, et al.
Published: (2017-05-01) -
Research and development of expansion agents for grouting mortars
by: Artem A. Kunitskikh
Published: (2015-09-01) -
Study of the Suitability of Different Types of Slag and Its Influence on the Quality of Green Grouts Obtained by Partial Replacement of Cement
by: Francisca Perez-Garcia, et al.
Published: (2019-04-01)