THE EFFECT OF MATERIAL CHOICE AND PROCESS PARAMETERS ON THE MECHANICAL STRENGTH OF 3D-PRINTED TRANSTIBIAL PROSTHETIC

• Main Authors: Shadi Sabeti, Silvia Ursula Raschke, Johanne Mattie
• Format: Article
• Language: English
• Published: Canadian Online Publication Group (COPG) 2018-12-01
• Series: Canadian Prosthetics & Orthotics Journal
• Subjects: Prosthetic socket; Transtibial; 3D Printing; Strength testing; Amputees; Amputation
• Online Access: https://jps.library.utoronto.ca/index.php/cpoj/article/view/32160
• ISSN: 2561-987X; 2561-987X

INTRODUCTION The most important aspect of a lower extremity prosthesis is the socket. The socket is the interface between the human and the mechanical support system1. There are different methods for producing prosthetic sockets. The traditional method requires a skilled prosthetist and is time consuming 2, 3. Using 3D printing technology for manufacturing prosthetic sockets promises to speed up the fabrication process and reduce materials and time cost significantly. 3D Printed prosthetic sockets have to potential to increase socket strength and durability. This paper investigates the effect of material choices and printing process parameters on the mechanical strength of 3D printed trans-tibial sockets. Abstract PDF  Link: https://jps.library.utoronto.ca/index.php/cpoj/article/view/32160/24510 How to cite: Sabeti S, Raschke S.U, Mattie J. THE EFFECT OF MATERIAL CHOICE AND PROCESS PARAMETERS ON THE MECHANICAL STRENGTH OF 3D-PRINTED TRANSTIBIAL PROSTHETIC. CANADIAN PROSTHETICS & ORTHOTICS JOURNAL, VOLUME 1, ISSUE 2, 2018; ABSTRACT, POSTER PRESENTATION AT THE AOPA’S 101ST NATIONAL ASSEMBLY, SEPT. 26-29, VANCOUVER, CANADA, 2018. DOI: https://doi.org/10.33137/cpoj.v1i2.32160 Abstracts were Peer-reviewed by the AOPA 2018 National Assembly Scientific Committee.