Evaluation of interface models for 3D-1D coupling of compressible Euler methods for the application on cavitating flows

• Main Authors: Deininger Martina, Jung Jonathan, Skoda Romuald, Helluy Philippe, Munz Claus-Dieter
• Format: Article
• Language: English
• Published: EDP Sciences 2013-01-01
• Series: ESAIM: Proceedings and Surveys
• Online Access: http://dx.doi.org/10.1051/proc/201238016

Numerical simulations of complete hydraulic systems (e.g. diesel injectors) can, due to high computational costs, currently not be done entirely in three dimensions. Our aim is to substitute the 3D solver by a corresponding 1D method in some parts of the system and develop a solver coupling with suitable interface models. Firstly, we investigate an interface model for non-cavitating flow passing the interface. A flux-coupling with a thin interface approach is considered and the jump in dimensions at the interface is transferred to an additional variable φ, which switches between the 3D and the 1D domain. As shown in two testcases, the error introduced in the vicinity of the interface is quite small. Two numerical flux formulations for the flux over the 3D-1D interface are compared and the Roe-type flux formulation is recommended. Secondly, extending the first method to cavitating flows passing the interface, we divide the density equation in two equations - one for liquid and one for vapor phase of the two-phase fluid - and couple the two equations by source terms depending on the free enthalpy. We propose two interface models for coupling 3D and 1D compressible density-based Euler methods that have potential for considering the entire (non-) cavitating hydraulic system behaviour by a 1D method in combination with an embedded detailed 3D simulation at much lower computational costs than the pure 3D simulation.