Optimization of PM Segments Shift Angles for Minimizing the Cogging Torque of YASA-AFPM Machines Using Response Surface Methodology
Mitigating the cogging torque is an important issue in designing the YASA machines. The main aim of the paper is to optimize an efficient technique to mitigate the cogging torque of YASA machines. In the suggested technique, the permanent magnets (PMs) are segmented into several segments in the radi...
Main Author: | S.J. Arand |
---|---|
Format: | Article |
Language: | English |
Published: |
University of Mohaghegh Ardabili
2021-12-01
|
Series: | Journal of Operation and Automation in Power Engineering |
Subjects: | |
Online Access: | http://joape.uma.ac.ir/article_1098_e13247bdfc014e7974eeb84e9b7f0af8.pdf |
Similar Items
-
Current Harmonics Controller for Reduction of Acoustic Noise, Vibrations and Torque Ripple Caused by Cogging Torque in PM Motors under FOC Operation
by: Martin Sumega, et al.
Published: (2020-05-01) -
Impact of Selected Methods of Cogging Torque Reduction in Multipolar Permanent-Magnet Machines
by: Zbigniew Goryca, et al.
Published: (2020-11-01) -
Review of research on AFPM hub motor
by: Jianguo DAI, et al.
Published: (2018-02-01) -
Comparison of Axial Flux PMSM and Outrunner PMSM under Same Physical and Electrical Parameters according to Cogging Torque
by: Ali SAYGIN, et al.
Published: (2018-09-01) -
Stator Configuration for Cogging Torque Minimization of Surface Mounted Permanent Magnet Synchronous Generators
by: Durmuş UYGUN, et al.
Published: (2018-09-01)