A <inline-formula> <tex-math notation="LaTeX">$1\times8$ </tex-math></inline-formula> Linear Ultra-Wideband Phased Array With Connected Dipoles and Hyperbolic Microstrip Baluns

• Main Authors: Ruoyu He, Hongbo Zhang, Chan Hwang See, Yan Su, Yue Ma, Deqing Kong, Xinying Zhu, Raed Abd-Alhameed
• Format: Article
• Language: English
• Published: IEEE 2018-01-01
• Series: IEEE Access
• Subjects: Connected dipole; feed blindness; hyperbolic microstrip balun; H-plane PEC walls; low profile array; ultra-wideband array
• Online Access: https://ieeexplore.ieee.org/document/8456515/
• ISSN: 2169-3536

A 1&#x00D7;8 linear single polarized ultra-wideband connected dipole phased array with wide angle scan range is proposed. The dipoles in the array are connected with each other in E-plane to improve the impedance matching on the low end of the frequency band. The frequency band and the scan range in E-plane is 2~9 GHz for broadside radiation, 2~8 GHz for 30&#x00B0; scan, 2~7 GHz for 45&#x00B0; scan, and 2~6.5 GHz for 60&#x00B0; scan. The VSWR is better than 2.0 across the frequency band from 2 to 9 GHz for broadside radiation and the cross-polarization level is below -10 dB. A hyperbolic microstrip balun is used as an impedance transformer to connect the 50 &#x03A9; SMA connector to a 150 &#x03A9; broadband dipole in an array. The structure of this antenna is totally planar and low profile, thus it is made easy to integrate with the PCB boards. To eliminate the surface wave blindness, no other dielectric layer is used in the array. The proposed balun supports common mode (CM) current and the radiation of this CM current cancels the radiation of the dipole in some frequency for a certain scan angle, this results in feed blindness. Adding H-plane PEC walls decreases the feed blindness frequency in the design.