Analysis of Changes in Fiber Density Distribution in a Cotton Combed Spinning System Using Modified Regulation of the Sliver Draft
Shortening the technological spinning processes, aiming at the reduction in production costs, causes problems with keeping up a high quality of yarn. Of great significance is the use of autolevellers that not only equalize the distribution of fiber linear density but also straighten the fibers and l...
| Main Author: | |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Sciendo
2019-03-01
|
| Series: | Autex Research Journal |
| Subjects: | |
| Online Access: | https://doi.org/10.1515/aut-2018-0022 |
| Summary: | Shortening the technological spinning processes, aiming at the reduction in production costs, causes problems with keeping up a high quality of yarn. Of great significance is the use of autolevellers that not only equalize the distribution of fiber linear density but also straighten the fibers and lay them parallel to the product axis. Consequently, they replace the machines eliminated from technological lines and contribute to the improvement in the quality of intermediate products and yarns. Using an example of the cotton combed spinning system, the article presents the analysis of the possibilities of using a short-term autoleveller with a modified operation algorithm that takes into account the phenomenon of sliver retardation after the process of short-term regulation. The regulation of draft was used before and after combing. The quality parameters of slivers used for feeding roving frames or rotor spinning machines were analyzed. |
|---|---|
| ISSN: | 2300-0929 |