Influence of agitation intensity on flotation rate of apatite particles

• Main Authors: Francisco Gregianin Testa, Mehdi Safari, David Deglon, Laurindo de Salles Leal Filho
• Format: Article
• Language: English
• Published: Fundação Gorceix
• Series: REM: International Engineering Journal
• Subjects: flotation kinetics; apatite; agitation
• Online Access: http://www.scielo.br/scielo.php?script=sci_arttext&pid=S2448-167X2017000400491&lng=en&tlng=en

Abstract The agitation intensity has a directly influence on flotation performance, lifting the particles and promoting the contact of bubbles and particles. In this paper, the energy input by the agitation on apatite flotation was investigated. The influence of pulp agitation in the flotation rate of particles with different sizes and two dosage levels was evaluated by batch testing. The flotation tests were conducted in an oscillating grid flotation cell (OGC), developed to promote a near isotropic turbulence environment. The cell is able to control the intensity of agitation and measure the energy transferred to the pulp phase. A sample of pure apatite was crushed (P80=310µm), characterized and floated with sodium oleate as collector. Four levels of energy dissipation, from 0.1 to 2 kWm-3, and two levels of collector dosage are used during the tests. The flotation kinetics by particle size were determined in function of the energy transferred. The results show a strong influence of the agitation intensity on the apatite flotation rate with both low and high dosage. For fine particles, when increasing the energy input, the flotation rate increase too, and this fact can be attributed to elevation of bubble-particle collisions. The kinetic result for the coarse particles demonstrated a reduction of the flotation rate whenever the energy input for this particle size was increased, whereby the turbulence caused by the agitation promotes the detachment of bubble-particle.