Stress Distribution of Bolted Joints With Different Lay-Up Types
A parametric study of the stress distribution in the composite plates is undertaken to show the effect of different lay-ups. Full 3-D elastic properties are required in the modelling. These properties are calculated using equations taken from the literature and derivation from simple Classical Lamin...
| Main Author: | |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
EDP Sciences
2016-01-01
|
| Series: | MATEC Web of Conferences |
| Online Access: | http://dx.doi.org/10.1051/matecconf/20167400003 |
| id |
doaj-24c2fd158001410e96487ab283fe1194 |
|---|---|
| record_format |
Article |
| spelling |
doaj-24c2fd158001410e96487ab283fe11942021-02-02T00:50:22ZengEDP SciencesMATEC Web of Conferences2261-236X2016-01-01740000310.1051/matecconf/20167400003matecconf_icmer2016_00003Stress Distribution of Bolted Joints With Different Lay-Up TypesAhmad H.A parametric study of the stress distribution in the composite plates is undertaken to show the effect of different lay-ups. Full 3-D elastic properties are required in the modelling. These properties are calculated using equations taken from the literature and derivation from simple Classical Laminate Plate Theory (CLPT). In previous experimental work, it was shown that tensile failure involved the development of a damage zone at the edge of the hole. In a double-lap joint, it is assumed that uniform stresses are exhibited throughout the plate thickness. Different lay-ups system give different tangential stress distributions and insignificant variation in the radial stress distribution along the hole boundary.http://dx.doi.org/10.1051/matecconf/20167400003 |
| collection |
DOAJ |
| language |
English |
| format |
Article |
| sources |
DOAJ |
| author |
Ahmad H. |
| spellingShingle |
Ahmad H. Stress Distribution of Bolted Joints With Different Lay-Up Types MATEC Web of Conferences |
| author_facet |
Ahmad H. |
| author_sort |
Ahmad H. |
| title |
Stress Distribution of Bolted Joints With Different Lay-Up Types |
| title_short |
Stress Distribution of Bolted Joints With Different Lay-Up Types |
| title_full |
Stress Distribution of Bolted Joints With Different Lay-Up Types |
| title_fullStr |
Stress Distribution of Bolted Joints With Different Lay-Up Types |
| title_full_unstemmed |
Stress Distribution of Bolted Joints With Different Lay-Up Types |
| title_sort |
stress distribution of bolted joints with different lay-up types |
| publisher |
EDP Sciences |
| series |
MATEC Web of Conferences |
| issn |
2261-236X |
| publishDate |
2016-01-01 |
| description |
A parametric study of the stress distribution in the composite plates is undertaken to show the effect of different lay-ups. Full 3-D elastic properties are required in the modelling. These properties are calculated using equations taken from the literature and derivation from simple Classical Laminate Plate Theory (CLPT). In previous experimental work, it was shown that tensile failure involved the development of a damage zone at the edge of the hole. In a double-lap joint, it is assumed that uniform stresses are exhibited throughout the plate thickness. Different lay-ups system give different tangential stress distributions and insignificant variation in the radial stress distribution along the hole boundary. |
| url |
http://dx.doi.org/10.1051/matecconf/20167400003 |
| work_keys_str_mv |
AT ahmadh stressdistributionofboltedjointswithdifferentlayuptypes |
| _version_ |
1724312803202826240 |