| Summary: | Glycerol conversion processes such as aqueous phase reforming and hydrogenolysis generate value-added compounds highly diluted in water. Because distillation is a high energy demand separation step, adsorption could be an attractive alternative to recover these chemicals. Adsorption isotherms of 1,2-propanediol, acetol, ethylene glycol and glycerol onto activated carbon were determined by batch adsorption experiments. These isotherms were fitted slightly better to the Freundlich equation than to the Langmuir equation. Acetol is the compound with the highest adsorption at concentrations smaller than 1 M. Properties of the adsorbate such as the −OH group number, chain length, molecular size and dipole moment, besides characteristics of the adsorbent such as the surface area, oxygen and ash content, are considered to explain the observed results. Moreover, adsorption experiments were performed with mixtures of compounds and it was determined that the molar amount adsorbed is less than predicted from the adsorption isotherms of the individual compounds treated separately. In addition, the influence of the activated carbon thermal pre-treatment temperature on the adsorption capacity has been studied, the optimum being 800 °C. An analysis of the influence of the activated carbon characteristics showed that the most important parameters are the total pore volume and the ash content.
|
|---|
