Reduction of contact stresses using involute gears with asymmetric teeth
Asymmetrical involute gears have a different value of the operating pressure angle for right and left side of the gear. These teeth are suitable for one direction of rotation. Such teeth enable to change the length of the generating line. They enable to improve the value of reduced radii of curvatur...
| Main Author: | |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Silesian University of Technology
2015-12-01
|
| Series: | Scientific Journal of Silesian University of Technology. Series Transport |
| Subjects: | |
| Online Access: | http://www.polsl.pl/Wydzialy/RT/ZN_T/pelne_teksty/vol89/177_ZN89_2015_Vojtkova.pdf |
| Summary: | Asymmetrical involute gears have a different value of the operating pressure angle for right and left side of the gear. These teeth are suitable for one direction of rotation. Such teeth enable to change the length of the generating line. They enable to improve the value of reduced radii of curvature. Asymmetrical teeth allow reducing the values of Hertz's pressures, especially on the root of the teeth. Hertz pressures are directly related to the asymmetry. |
|---|---|
| ISSN: | 0209-3324 |