| Summary: | The objective of this paper is to investigate the bond properties of prestressing strands embedded in Ultra–High–Performance Concrete (UHPC).The UHPC was made in laboratory using local materials in Vietnam.Its mixture contains: silica aggregates, portland cement PC40, fly ash, silica fume, polycarboxylate superplasticizer and the micro steel fibers.The experimental process is realized on a pull-out test. The volume fraction of micro steel fibers in UHPC was 2%. The prestressing strand with diameters of 15.2mm was considered. The interface shear strength between strand and UHPC is identified based on the results of force and displacement obtained during the pull-out test. The Cohesive Zone Model (CZM) is implemented in finite element model to study this interface behavior. This model described by a piecewise linear elastic law. The CZM’s parameters are identified based on experimental results of pull-out test.The numerical studies are used the CZM in ANSYS software. Two numerical tests are realized and compared with experimental results: pull-out test and other test to verify the deflection of I girder due to prestressing force.
|
|---|
