Numerical Simulation of Macrosegregation Formation in a 2.45 ton Steel Ingot Using a Three-Phase Equiaxed Solidification Model

• Main Authors: Tao Wang, Engang Wang, Yves Delannoy, Yves Fautrelle, Olga Budenkova
• Format: Article
• Language: English
• Published: MDPI AG 2021-02-01
• Series: Metals
• Subjects: ingot; equiaxed grain; solidification; macrosegregation; surface cooling intensity
• Online Access: https://www.mdpi.com/2075-4701/11/2/262

In the present work macrosegregation during solidification of a 2.45 ton steel ingot is simulated with a pure equiaxed model, which was tested previously via modeling of a benchmark experiment. While the columnar structure is not taken into account, a packed layer formed over inner walls of the mold at an early stage of solidification reproduces to some extent phenomena generally related to zones of columnar dendrites. Furthermore, it is demonstrated that interaction of free-floating equiaxed grains with ascending convective flow in the bulk liquid results in flow instabilities. This defines the irregular form of the negative segregation zone, the formation of which at the ingot bottom corresponds to experimental observation. Vertical channels reported in experimental measurements are reproduced in simulations. It is confirmed that intensification of ingot cooling may decrease segregation in the ingot.