| Summary: | Wood fibre cement (WFC) boards are well established commercially and widely used in many developed countries. The combination of the properties of two important materials, i.e., cement, and previously treated fibrous materials like wood or agricultural residues; which made up the board, contributed in the performance of the board as building material. In this work, the WFC matrix (WFCM) samples are produced to determine the physical properties of WFCM such as the density and water absorption. The wood fibres are incorporated/treated with three different chemical additives; calcium formate (Ca(HCOO)2), sodium silicate (Na2.SiO3) and magnesium chloride (MgCl2) prior to mixing with cement. The mechanical properties of the WFCM, with or without chemicals treatment of fibres, such as the compressive strength and flexural strength are evaluated. Three wood/cement ratios (50:50, 40:60, 30:70) are used and the percentages of water and accelerator were 80% and 3% based on the cement weight, respectively. Three moisture-conditioned samples; accelerated aging, dry and wet conditions are used for flexural test. The results reveal that the wood/cement ratio, chemical additives and moisture content had a marked influence on the physical and mechanical properties of the matrix. Finally, it has been shown that the 40:60 wood/cement ratio samples with prior chemicals treatment of the fibres that undergo accelerated aging conditioning achieve higher strength then dry and wet-conditioned boards.
|
|---|
