Modeling of Drag Finishing—Influence of Abrasive Media Shape

• Main Authors: Irati Malkorra, Hanène Souli, Ferdinando Salvatore, Pedro Arrazola, Joel Rech, Mehmet Cici, Aude Mathis, Jason Rolet
• Format: Article
• Language: English
• Published: MDPI AG 2021-04-01
• Series: Journal of Manufacturing and Materials Processing
• Subjects: drag finishing; numerical modeling; arbitrary Lagrangian–Eulerian (ALE) formulation; abrasive media shape; rheological behavior
• Online Access: https://www.mdpi.com/2504-4494/5/2/41

Drag finishing is a widely used superfinishing technique in the industry to polish parts under the action of abrasive media combined with an active surrounding liquid. However, the understanding of this process is not complete. It is known that pyramidal abrasive media are more prone to rapidly improving the surface roughness compared to spherical ones. Thus, this paper aims to model how the shape of abrasive media (spherical vs. pyramidal) influences the material removal mechanisms at the interface. An Arbitrary Lagrangian–Eulerian model of drag finishing is proposed with the purpose of estimating the mechanical loadings (normal stress, shear stress) induced by both abrasive media at the interface. The rheological behavior of both abrasive slurries (media and liquid) has been characterized by means of a Casagrande direct shear test. In parallel, experimental drag finishing tests were carried out with both media to quantify the drag forces. The correlation between the numerical and experimental drag forces highlights that the abrasive media with a pyramidal shape exhibits a higher shear resistance, and this is responsible for inducing higher mechanical loadings on the surfaces and, through this, for a faster decrease of the surface roughness.