Poly(Ethylene Furanoate) along Its Life-Cycle from a Polycondensation Approach to High-Performance Yarn and Its Recyclate

• Main Authors: Tim Höhnemann, Mark Steinmann, Stefan Schindler, Martin Hoss, Simon König, Antje Ota, Martin Dauner, Michael R. Buchmeiser
• Format: Article
• Language: English
• Published: MDPI AG 2021-02-01
• Series: Materials
• Subjects: polycondensation; melt; solid-state; 2,5-furan dicarboxylic acid; polyethylene furanoate; fiber spinning
• Online Access: https://www.mdpi.com/1996-1944/14/4/1044
• ISSN: 1996-1944

We report on the pilot scale synthesis and melt spinning of poly(ethylene furanoate) (PEF), a promising bio-based fiber polymer that can heave mechanical properties in the range of commercial poly(ethylene terephthalate) (PET) fibers. Catalyst optimization and solid state polycondensation (SSP) allowed for intrinsic viscosities of PEF of up to 0.85 dLꞏg⁻¹. Melt-spun multifilament yarns reached a tensile strength of up to 65 cN^.tex⁻¹ with an elongation of 6% and a modulus of 1370 cN^.tex⁻¹. The crystallization behavior of PEF was investigated by differential scanning calorimetry (DSC) and XRD after each process step, i.e., after polymerization, SSP, melt spinning, drawing, and recycling. After SSP, the previously amorphous polymer showed a crystallinity of 47%, which was in accordance with literature. The corresponding XRD diffractograms showed signals attributable to α-PEF. Additional, clearly assignable signals at 2θ > 30° are discussed. A completely amorphous structure was observed by XRD for as-spun yarns, while a crystalline phase was detected on drawn yarns; however, it was less pronounced than for the granules and independent of the winding speed.