Summary: | We report<b> </b>on a fiber-coupled, quartz-enhanced photoacoustic spectroscopy (QEPAS) near-IR sensor for sequential detection of methane (CH<sub>4</sub> or C1) and ethane (C<sub>2</sub>H<sub>6</sub> or C2) in air. With the aim of developing a lightweight, compact, low-power-consumption sensor suitable for unmanned aerial vehicles (UAVs)-empowered environmental monitoring, an all-fiber configuration was designed and realized. Two laser diodes emitting at 1653.7 nm and 1684 nm for CH<sub>4</sub> and C<sub>2</sub>H<sub>6 </sub>detection, respectively, were fiber-combined and fiber-coupled to the collimator port of the acoustic detection module. No cross talk between methane and ethane QEPAS signal was observed, and the related peak signals were well resolved. The QEPAS sensor was calibrated using gas samples generated from certified concentrations of 1% CH<sub>4</sub> in N<sub>2</sub> and 1% C<sub>2</sub>H<sub>6</sub> in N<sub>2</sub>. At a lock-in integration time of 100 ms, minimum detection limits of 0.76 ppm and 34 ppm for methane and ethane were achieved, respectively. The relaxation rate of CH<sub>4</sub> in standard air has been investigated considering the effects of H<sub>2</sub>O, N<sub>2 </sub>and O<sub>2</sub> molecules. No influence on the CH<sub>4</sub> QEPAS signal is expected when the water vapor concentration level present in air varies in the range 0.6–3%.
|