RESEARCHES REGARDING THE MICRODURITY OF SOME FLEXIBILE MATERIALS USED IN REMOVABLE PROSTHESIS
Introduction Dental material hardness measures its indent resistance with a tough alloy (steel or diamond). The aim of the study Investigations were aimed at testing the microhardness and determination of its variation in the case of flexible acrylic resins used in prosthetic therapy with partial...
Main Authors: | , , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Romanian Dental Association for Education
2015-01-01
|
Series: | Romanian Journal of Medical and Dental Education |
Subjects: | |
Online Access: | http://journal.adre.ro/cercetari-asupra-microduritatii-unor-materiale-flexibile-utilizate-in-protezarea-mobilizabila-2/ |
Summary: | Introduction Dental material hardness measures its indent resistance with a tough alloy (steel or diamond). The
aim of the study Investigations were aimed at testing the microhardness and determination of its variation in the
case of flexible acrylic resins used in prosthetic therapy with partial dentures. Material and methods
Experimental research on determining microhardness changes were made on 3 flexible acrylic resins:
Biodentaplast, Lucitone FRS and Valplast FP. Specimens were performed in the dental laboratory of Clinical
Base of dental teaching-"Gr.T.Popa" UMF Iaşi. Vickers microhardness measurement was performed using CV
Instruments 400 DM in the laboratory of Surface Engineering of Materials Science and Engineering Faculty of
the "Gheorghe Asachi" Technical University Iasi. Results Highest average was obtained in determinations on
specimen Valplast FP from Valplast International Corp, followed by Lucitone FRS from Dentsply and the
lowest average microhardness was obtained for Biodentaplast from Bredent. Conclusions In technology of
partial dentures hardness value indicates the ease of finishing a structure and resistance to abrasion while
performing function |
---|---|
ISSN: | 2393-1531 2393-1108 |