STRENGTH OF ABS PARTS PRODUCED BY FUSED DEPOSITION MODELLING TECHNOLOGY – A CRITICAL ORIENTATION PROBLEM
Numerous experimental studies, including experiments performed by the authors, have shown that the part orientation during layer deposition has a very strong influence on final strength of a product manufactured by additive Fused Deposition Technology. The paper presents the results of tensile, bend...
Main Authors: | Filip Górski, Radosław Wichniarek, Wiesław Kuczko, Przemysław Zawadzki, Paweł Buń |
---|---|
Format: | Article |
Language: | English |
Published: |
Society of Polish Mechanical Engineers and Technicians
2015-05-01
|
Series: | Advances in Science and Technology Research Journal |
Subjects: | |
Online Access: | http://www.astrj.com/Strength-of-abs-parts-produced-by-fused-deposition-modelling-technology-a-critical-orientation-problem,2359,0,2.html |
Similar Items
-
Prototyping of an Individualized Multi-Material Wrist Orthosis using Fused Deposition Modelling
by: Filip Górski, et al.
Published: (2019-12-01) -
Constitutive modeling of fused deposition modeling acrylonitrile butadiene styrene (ABS)
by: Mamadapur, Monish Shivappa
Published: (2010) -
Taguchi S/N and TOPSIS Based Optimization of Fused Deposition Modelling and Vapor Finishing Process for Manufacturing of ABS Plastic Parts
by: Jasgurpreet Singh Chohan, et al.
Published: (2020-11-01) -
Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts
by: Kenny Álvarez, et al.
Published: (2016-09-01) -
APPLICATION OF ADDITIVE TECHNOLOGY OF FUSED DEPOSITION MODELING FOR MANUFACTURING SMALL SERIES OF ELASTIC MODELS
by: Radosław WICHNIAREK, et al.
Published: (2014-06-01)