The Investigation of The Effect of Cryogenic Processed PVD and CVD Coated Cutting Tools on Machinability in Turning on Hastelloy X Super Alloy
Super alloys are alloys which has the resistance of high temperatures. In addition to that, super alloys are widely used in aerospace, aviation industries, also in gas turbines because of their high creep strength and high corrosion resistance. In this study, cutting forces obtained as a result of t...
Main Authors: | , , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Gazi University
2017-06-01
|
Series: | Gazi Üniversitesi Fen Bilimleri Dergisi |
Subjects: | |
Online Access: | http://dergipark.gov.tr/download/issue-file/5679 |
id |
doaj-5833a4c116e04346a96715a519d87602 |
---|---|
record_format |
Article |
spelling |
doaj-5833a4c116e04346a96715a519d876022021-09-02T12:25:57ZengGazi UniversityGazi Üniversitesi Fen Bilimleri Dergisi2147-95262147-95262017-06-0152231239The Investigation of The Effect of Cryogenic Processed PVD and CVD Coated Cutting Tools on Machinability in Turning on Hastelloy X Super AlloyGültekin UZUNSelçuk YAGMURİhsan KORKUTUlvi ŞEKERSuper alloys are alloys which has the resistance of high temperatures. In addition to that, super alloys are widely used in aerospace, aviation industries, also in gas turbines because of their high creep strength and high corrosion resistance. In this study, cutting forces obtained as a result of turning of the Hastelloy X super alloy were evaluated. The effects of different cutting parameters and the cryogenic treatment applied to different cutting tools (PVD, CVD coated) on cutting forces were investigated. During the experiments, four different cutting speeds (60, 75, 90 and 120 m/min) and three different feed rates (0.10 - 0.15 - 0.20 mm/rev) were used. As a result of the experiments, it is observed that increasing cutting speeds and feed rates increase cutting forces. Moreover, the cutting forces obtained with CVD coated cutting tools were less than PVD coated cutting tools. The best tool life result was obtained with cryogenic treated CVD coated cutting tools. http://dergipark.gov.tr/download/issue-file/5679Hastelloy XTurningCutting ForceTool Wear |
collection |
DOAJ |
language |
English |
format |
Article |
sources |
DOAJ |
author |
Gültekin UZUN Selçuk YAGMUR İhsan KORKUT Ulvi ŞEKER |
spellingShingle |
Gültekin UZUN Selçuk YAGMUR İhsan KORKUT Ulvi ŞEKER The Investigation of The Effect of Cryogenic Processed PVD and CVD Coated Cutting Tools on Machinability in Turning on Hastelloy X Super Alloy Gazi Üniversitesi Fen Bilimleri Dergisi Hastelloy X Turning Cutting Force Tool Wear |
author_facet |
Gültekin UZUN Selçuk YAGMUR İhsan KORKUT Ulvi ŞEKER |
author_sort |
Gültekin UZUN |
title |
The Investigation of The Effect of Cryogenic Processed PVD and CVD Coated Cutting Tools on Machinability in Turning on Hastelloy X Super Alloy |
title_short |
The Investigation of The Effect of Cryogenic Processed PVD and CVD Coated Cutting Tools on Machinability in Turning on Hastelloy X Super Alloy |
title_full |
The Investigation of The Effect of Cryogenic Processed PVD and CVD Coated Cutting Tools on Machinability in Turning on Hastelloy X Super Alloy |
title_fullStr |
The Investigation of The Effect of Cryogenic Processed PVD and CVD Coated Cutting Tools on Machinability in Turning on Hastelloy X Super Alloy |
title_full_unstemmed |
The Investigation of The Effect of Cryogenic Processed PVD and CVD Coated Cutting Tools on Machinability in Turning on Hastelloy X Super Alloy |
title_sort |
investigation of the effect of cryogenic processed pvd and cvd coated cutting tools on machinability in turning on hastelloy x super alloy |
publisher |
Gazi University |
series |
Gazi Üniversitesi Fen Bilimleri Dergisi |
issn |
2147-9526 2147-9526 |
publishDate |
2017-06-01 |
description |
Super alloys are alloys which has the resistance of high temperatures. In addition to that, super alloys are widely used in aerospace, aviation industries, also in gas turbines because of their high creep strength and high corrosion resistance. In this study, cutting forces obtained as a result of turning of the Hastelloy X super alloy were evaluated. The effects of different cutting parameters and the cryogenic treatment applied to different cutting tools (PVD, CVD coated) on cutting forces were investigated. During the experiments, four different cutting speeds (60, 75, 90 and 120 m/min) and three different feed rates (0.10 - 0.15 - 0.20 mm/rev) were used. As a result of the experiments, it is observed that increasing cutting speeds and feed rates increase cutting
forces. Moreover, the cutting forces obtained with CVD coated cutting tools were less than PVD coated cutting tools. The best tool life result was obtained with cryogenic treated CVD coated
cutting tools. |
topic |
Hastelloy X Turning Cutting Force Tool Wear |
url |
http://dergipark.gov.tr/download/issue-file/5679 |
work_keys_str_mv |
AT gultekinuzun theinvestigationoftheeffectofcryogenicprocessedpvdandcvdcoatedcuttingtoolsonmachinabilityinturningonhastelloyxsuperalloy AT selcukyagmur theinvestigationoftheeffectofcryogenicprocessedpvdandcvdcoatedcuttingtoolsonmachinabilityinturningonhastelloyxsuperalloy AT ihsankorkut theinvestigationoftheeffectofcryogenicprocessedpvdandcvdcoatedcuttingtoolsonmachinabilityinturningonhastelloyxsuperalloy AT ulviseker theinvestigationoftheeffectofcryogenicprocessedpvdandcvdcoatedcuttingtoolsonmachinabilityinturningonhastelloyxsuperalloy AT gultekinuzun investigationoftheeffectofcryogenicprocessedpvdandcvdcoatedcuttingtoolsonmachinabilityinturningonhastelloyxsuperalloy AT selcukyagmur investigationoftheeffectofcryogenicprocessedpvdandcvdcoatedcuttingtoolsonmachinabilityinturningonhastelloyxsuperalloy AT ihsankorkut investigationoftheeffectofcryogenicprocessedpvdandcvdcoatedcuttingtoolsonmachinabilityinturningonhastelloyxsuperalloy AT ulviseker investigationoftheeffectofcryogenicprocessedpvdandcvdcoatedcuttingtoolsonmachinabilityinturningonhastelloyxsuperalloy |
_version_ |
1721175495263911936 |