A New Direction in Microfluidics: Printed Porous Materials

• Main Authors: Hanno Evard, Hans Priks, Indrek Saar, Heili Aavola, Tarmo Tamm, Ivo Leito
• Format: Article
• Language: English
• Published: MDPI AG 2021-06-01
• Series: Micromachines
• Subjects: microfluidics; porous material microfluidics; screen printing; direct write printing; photolithography
• Online Access: https://www.mdpi.com/2072-666X/12/6/671

In this work, the feasibility of a novel direction for microfluidics is studied by demonstrating a set of new methods to fabricate microfluidic systems. Similarly to microfluidic paper-based analytical devices, porous materials are being used. However, alternative porous materials and different printing methods are used here to give the material the necessary pattern to act as a microfluidic system. In this work, microfluidic systems were produced by the following three separate methods: (1) by curing a porous monolithic polymer sheet into a necessary pattern with photolithography, (2) by screen printing silica gel particles with gypsum, and (3) by dispensing silica gel particles with polyvinyl acetate binder using a modified 3D printer. Different parameters of the printed chips were determined (strength of the printed material, printing accuracy, printed material height, wetting characteristics, repeatability) to evaluate whether the printed chips were suitable for use in microfluidics. All three approaches were found to be suitable, and therefore the novel approach to microfluidics was successfully demonstrated.