Design, test, and operation of new tapered stripline injection kickers for the e^{+}e^{-} collider DAΦNE

• Main Authors: David Alesini, Susanna Guiducci, Fabio Marcellini, Pantaleo Raimondi
• Format: Article
• Language: English
• Published: American Physical Society 2010-11-01
• Series: Physical Review Special Topics. Accelerators and Beams
• Online Access: http://doi.org/10.1103/PhysRevSTAB.13.111002

For the injection upgrade of the Φ factory DAΦNE, new fast stripline kickers have been designed. They can operate with very short pulse generators to perturb only the injected bunch and the two stored adjacent ones. The design is based on tapering the striplines to simultaneously obtain low beam coupling and transfer impedances, excellent uniformity of the deflecting field, and better matching between the strip and the pulse generators. It has been done using 2D and 3D electromagnetic codes (Superfish and HFSS). The kickers have been constructed, tested, and installed in the collider. Measurements of the reflection coefficient at input ports and of the longitudinal and transverse beam coupling impedance have been also performed to characterize the structure and have been compared to the simulation results. A circuital model of general tapered striplines for a first order estimation of the transfer and longitudinal beam coupling impedances is also presented. Finally operational performances are described, pointing out the problems which occurred and the flexibility of the stripline structures that worked with both the short and with the previously installed long pulse generators and have been used as an additional damping kicker to improve the efficiency of the horizontal multibunch feedback system. This system is also a demonstration of the operation of fast kickers with similar characteristics as those for the International Linear Collider (ILC) damping rings (DRs).