Removal of Nitrate, Ammonium, and Phosphate from Water Using Conocarpus and Paulownia Plant Biochar

• Main Authors: Maryam Sayadi, Masumeh Farasati, Mojtaba G. Mahmoodlu, Faramarz Rostami Charati
• Format: Article
• Language: English
• Published: Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR 2020-08-01
• Series: Iranian Journal of Chemistry & Chemical Engineering
• Subjects: nitrate; ammonium; phosphate, biochar; kinetic, isotherm
• Online Access: http://www.ijcce.ac.ir/article_35183_42bdbb435bd42dc6f5845a44eff32235.pdf
• ISSN: 1021-9986; 1021-9986

In this research, the biochar ability of Conocarpus and Paulownia plant as adsorbents to remove Nitrate, Ammonium, and phosphate from the water were investigated. For this purpose, the effect of contact time, initial concentration, and pH of solution on the removal of Nitrate, Ammonium, and phosphate by the biochar of Conocarpus and Paulownia plants have studied. The Conocarpus and Paulownia plants have been modified by ferrous chloride for nitrate removal. Conocarpus and Paulownia have been modified by potassium hydroxide for ammonia removal. Also, Conocarpus have been modified by ferrous chloride and Paulownia has modified by Potassium hydroxide for phosphate removal. The studied adsorbent properties with FT-IR and SEM, which their physical properties are: density, organic material percent, ash percent, mass moisture, and special surfaces have been determined by the methylene blue method. The Pseudo-First-order order, Pseudo-Second-order, Elovich, Intraparticle diffusion, and power have been used for describing the kinetic data. In addition, the Langmuir model, Freundlich, Temkin, Halsy, and Langmuir-Freundlich have used for describing the isotherm adsorption data. The results of this study showed that the Nitrate, Ammonium, and phosphate adsorption level has increased bypassing the time and after 60 and 120 min, they have reached their maximum level respectively. The maximum Ammonium adsorption level in modified biochar of Conocarpus was in pH=6, and in Palonia biochar was in pH=2 and the maximum nitrate adsorption was in pH=2. In addition, the maximum phosphate adsorption was in pH=8. By increasing the initial concentration of phosphate and nitrate, the removal efficiency has increased. The maximum phosphate removal efficiency in the concentration of 14mg/L in modified paulownia and Conocarpus biochar was 100%. In addition, the concentration of 50mg/L nitrate in modified Paulownia biochar was 98.37%. The maximum Ammonium removal efficiency in the concentration of 5 mg/ L by modified Conocarpus biochar was 82%.