Reuse of Heat Resistant Glass Cullet in Cement Composites Subjected to Thermal Load

• Main Authors: Aleksandra Powęzka, Jacek Szulej, Paweł Ogrodnik
• Format: Article
• Language: English
• Published: MDPI AG 2020-10-01
• Series: Materials
• Subjects: recycled aggregates; cullet; cement composite
• Online Access: https://www.mdpi.com/1996-1944/13/19/4434

The article describes the possibility of using waste glass cullet as an alternative aggregate for the production of cement composites. Three concrete mixes based on Portland cement CEM I 42.5 R with different contents of recyclate were designed. Borosilicate glass cullet was introduced into the batch by reducing the content of natural aggregate by 0%, 2.5% and 7.5%. Apparent density, water absorption and compressive strength at elevated temperature were measured. The temperature distribution, in cubic samples, was followed by thermocouples. The elements were heated in a special furnace at the temperatures of 200 °C, 400 °C, 600 °C and 800 °C. The composite topography and phase composition were observed using X-ray energy scattering electron microscopy. The results show that the appropriate modification of the cement composite with 2.5% heat-resistant glass cullet improves both the thermal and mechanical properties. Compressive strength reaches an average value of 48.6 MPa after 28 days. The increase in temperature weakens the structure of the composite. It was found that the obtained cement composite has good physico–chemical properties. The research results are presented in the article.