Effect of Separation Angle and Nozzle Radial Position on Mixing Time in Ladles with Two Nozzles
Chemical, thermal and mechanical homogenization of both slag and steel during the ladle furnace process depends on the design of the gas injection system in gas bottom stirred ladles. In the past, a large number of variables have been investigated, nevertheless due to the importance of the slag laye...
Main Authors: | A. S. Gómez, A. N. Conejo, V. R. Zenit |
---|---|
Format: | Article |
Language: | English |
Published: |
Isfahan University of Technology
2018-01-01
|
Series: | Journal of Applied Fluid Mechanics |
Subjects: | |
Online Access: | http://jafmonline.net/JournalArchive/download?file_ID=44248&issue_ID=246 |
Similar Items
-
Development of High Resistance Hot Mix Asphalt with Electric Arc Furnace Slag, Ladle Furnace Slag, and Cellulose Fibers from the Papermaking Industry
by: Juan María Terrones-Saeta, et al.
Published: (2021-01-01) -
Ladle Steel Slag in Activated Systems for Construction Use
by: Diego Aponte, et al.
Published: (2020-07-01) -
Evaluation of flexural properties and characterisation of 10-mm thin geopolymer based on fly ash and ladle furnace slag
by: Ng Yong-Sing, et al.
Published: (2021-11-01) -
Use of Ladle Furnace Slag and Other Industrial By-Products to Encapsulate Chloride in Municipal Solid Waste Incineration Fly Ash
by: Ying Wang, et al.
Published: (2019-03-01) -
The effect of argon stirring on separation of oxidic inclusions in the ladle furnace at Sandvik Materials Technology AB
by: Andersson, Erik
Published: (2015)