Influence of Tensile Speeds on the Failure Loads of the DP590 Spot Weld under Various Combined Loading Conditions

• Main Authors: Jung Han Song, Hoon Huh
• Format: Article
• Language: English
• Published: Hindawi Limited 2015-01-01
• Series: Advances in Materials Science and Engineering
• Online Access: http://dx.doi.org/10.1155/2015/297915

This paper is concerned with the evaluation of the dynamic failure load of the spot weld under combined axial and shear loading conditions. The testing fixture is designed to impose the combined axial and shear load on the spot weld. Using the proposed testing fixtures and specimens, quasi-static and dynamic failure tests of the spot weld are conducted with seven different combined loading conditions. The failure load and failure behavior of the spot weld are investigated with different loading conditions. Effect of tensile speeds on the failure load of the spot weld, which is critical for structural crashworthiness, is also examined based on the experimental data. The failure loads measured from the experiment are decomposed into the two components along the axial and shear directions and failure contours are plotted with different loading speeds. Dynamic sensitivities of failure loads with various combined loading conditions were also analyzed. Experimental results indicate that the failure contour is expanded with increasing loading speeds and failure loads show similar dynamic sensitivity with respect to the loading angles.