Numerical Simulation on the Device of Rare Earth Oxide Preparation by Rare Earth Chloride Spray Pyrolysis
Based on the industrial applications of jet pyrolysis technology and it being used for the production of rare earth oxides, the paper hopes to find out an efficient, economic, and environmental friendly new technology which is suitable for production of rare earth oxides. In this paper, a chloride p...
Main Authors: | , , , , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Hindawi Limited
2015-01-01
|
Series: | Mathematical Problems in Engineering |
Online Access: | http://dx.doi.org/10.1155/2015/704874 |
Summary: | Based on the industrial applications of jet pyrolysis technology and it being used for the production of rare earth oxides, the paper hopes to find out an efficient, economic, and environmental friendly new technology which is suitable for production of rare earth oxides. In this paper, a chloride pyrolysis water model is designed, and standard κ-ε turbulence model and VOF model were coupled to simulate the three-dimensional steady gas-liquid flow in jet reactor. The valuable parameter we got provides strong basis for the experimental equipment manufacturing in thermal state and determining test program. Conclusions show that when the drainage tube diameter is 3 mm, it can guarantee that two-phase distribution of the gas-liquid is more uniform and easy for gas-liquid mixing in the tail region of the Venturi tube. If the fluid near the middle of the duct in front of the Venturi starts to reach equilibrium as constant speed flowing, it proves that elongated pipe is conducive to obtain a stable flow of air required by experiments. In the adjustable pipeline location of the Venturi tube, fluid can form a closed loop and generate reflux in the export where atomization and gas-liquid mixing have good effects. |
---|---|
ISSN: | 1024-123X 1563-5147 |