Influence of ploughshare surface layers on ploughing efficiency
The paper presents comparison between standard ploughshares made of manganese steel 50Mn7 and the authors’ ploughshares hardfaced with a layer of C-Co-Cr-Ni-Si on the same steel. The research was carried out by using two tractors with two four-furrow plough of the same power in a total of 360 workin...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Croatian Metallurgical Society
2018-01-01
|
| Series: | Metalurgija |
| Subjects: | |
| Online Access: | http://hrcak.srce.hr/file/278984 |
| Summary: | The paper presents comparison between standard ploughshares made of manganese steel 50Mn7 and the authors’ ploughshares hardfaced with a layer of C-Co-Cr-Ni-Si on the same steel. The research was carried out by using two tractors with two four-furrow plough of the same power in a total of 360 working hours, and a total of 180 hours of ploughing with each ploughshare. Ploughshares were used to measure hardness, to analyse the structure and wear. |
|---|---|
| ISSN: | 0543-5846 1334-2576 |